775R Trimmer - Parts

It is an authentic manufacturer-supplied part that is specially made for use with lawn and garden equipment. This is an identical replacement for a missing or a faulty clutch spring that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardwar...Read moree. Keep in mind this high-quality clutch spring is made of durable metal and is sold in a pack of two.

This OEM Recoil Pulley Assembly includes Rope, Pulley and Inner Spring, and is a plastic kit which is rated "Medium" difficulty to install. Installation requires a screwdriver, pliers, socket set, and wrench set. This kit is used to house the starter rope. If damaged you might not be able to pull on the rope, it could become jammed. If broken, it should be replaced.

Genuine OEM replacement part, this item is sold individually. The 753-04257 Slider is part of the cutting string release system for the Trimmers listed below. If your trimmer is not releasing the cutting line properly check this part for wear and all of the other parts associated with it.

The housing is sourced from the original manufacturer for use with Craftsman gas powered trimmers. This part is a kit that is used to house the throttle trigger. The kit includes the housing, hardware, and the trigger. These housing kits are sold individually, please see part list for related parts such as the throttle cable.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.

This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with handheld trimmers/edgers. This spring helps the throttle trigger to retract. It is made out of metal and it is sold individually. Replacing this item you would need a screwdriver and pliers.

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for replacing the carburetor mount gasket is if there is oil leaking from the crankcase, the crankcase gasket is missing or damaged or any time the ...Read morecrankcase cover is removed. This part is sold individually. The tools that you will need to replace the carburetor mount gasket is a receptacle for draining fuel, Phillip's / Torx drivers, long-nosed pliers and a razor blade.

Is your dishwasher door not staying shut? That's frustrating! The 2 Door Latch could be just the fix you need. It's a small yet highly important part that makes sure your dishwasher door stays tightly closed while your machine 2ts to work on your dishes. Placed at the top of your door, it's the hero behind the scenes, ensuring perfect eff...Read moreiciency every time. But why is it so crucial? Well, without a properly latching door, your once trustworthy dishwasher can ineffective or even unsafe. With the 2 Door Latch, you can return your machine back to its former glory, working smoothly like brand new. The good news? You don't need to call a professional! Installation is so straightforward, you can do it yourself. Just remember to switch off your power supply first, as safety always comes first. In addition, it might be wise to wear work gloves to protect your hands. So, take the worry out of dishwashing. With the 2 Door Latch, it?s super easy to 2t your dishwasher running perfectly again. Trust us, your dishwasher will thank you.

This is a genuine manufacturer sourced replacement fuel cap assembly. It is supplied directly from original manufacturer for use with a variety of gas powered lawn and garden equipment. It is used to keep the fuel in the tank. If the fuel cap is damaged or lost it should be replaced for the unit to function safely. This is a plastic fuel cap that is sold individually.

The metal spring goes between the e-clip and the plunger and helps to maintain tension. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. This is a small part that will need to be replaced if it becomes lost or stretched and may require a screwdriver to install the spring. This is available as an individual replacement part.

This is a high quality OEM supplied replacement hardware that is specially produced for use with lawn and garden equipment. It is a standard hardware that has multiple uses depending on the unit, please make sure to check appropriate diagrams for correct location and use of this screw. Please note one durable metal torx screw is included per order.