EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

769-07021 MTD Snow Blower - Parts

13 - 24 of 416

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bushing-.380 Id – Part Number: 941-0475
$6.40
In Stock
Bushing-.380 Id
Part #941-0475
This is an authentic OEM part for Craftsman lawn and garden equipment. This bushing has an internal diameter of 0.380", is made of durable black plastic, is not part of an assembly or kit, and is sold individually. The purpose of this bushing is to ensure there is a tight fit between parts. A common sign this part needs to be replaced is if you notice any parts loosely connected or detached. This part will become worn through regular use of the machine. It is located in various areas, depending on your model. Refer to your owner's manual for the exact location. You will need a wrench and pliers to complete this repair. Customers rate this repair as Medium difficulty.
Screw Hex.wash.hd – Part Number: 710-1652
$6.40
In Stock
Screw Hex.wash.hd
Part #710-1652
This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is used with different types of machines and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part.
Snow Blower Hex Flange Bearing – Part Number: 941-0245
$13.92
In Stock
Snow Blower Hex Flange Bearing
Part #941-0245
Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature multiple of these bearings, so refer to any diagrams for your model to determine whether you will need one, or more. This is an OEM part that is sold as an individual item and has a 0.75-inch inner-diameter, 1-inch outer-diameter, and 1-inch height.
Fuel Bowl Gasket – Part Number: 951-11970
$10.67
On Order
Fuel Bowl Gasket
Part #951-11970
This fuel bowl gasket is an authentic OEM replacement part. It is a thin, rubber strip responsible for creating a tight seal between the fuel bowl and carburetor to prevent fuel from leaking out. If the fuel bowl gasket is faulty, it can cause fuel to leak from the carburetor, resulting in rough idling, stalling, or difficulty starting the engine. Over time the gasket may lose its elasticity, tear, or fall off due to exposure to high heat, and fuel, or because of improper installation. To remove the faulty gasket, you will first need to detach the fuel bowl from the carburetor body. Peel off the old gasket and thoroughly clean the surface to remove any residue or dirt. Align the new gasket with the fuel bowl and carburetor and press it in until it is flat and secured to the sealing surface.
Snow Blower Auger Cable – Part Number: 946-04230B
$28.55
In Stock
Snow Blower Auger Cable
★★★★★
★★★★★
(2)
Part #946-04230B
This is a genuine replacement clutch cable sourced from the original equipment manufacturer, designed for use with MTD and Yard Man snowblowers. It serves as an identical replacement for a missing or damaged cable originally installed on new units and plays a vital role in engaging the auger for proper snowblower operation. Made with high-quality rubber insulation, this durable component is sold individually. Please note that the housing, trigger, and hardware are not included and must be purchased separately. For proper installation, refer to your model’s diagram, and be prepared to use tools such as pliers and a wrench set.
Snow Blower Worm Gear – Part Number: 917-04861
$61.58
In Stock
Snow Blower Worm Gear
Part #917-04861
This is a worm gear that is designed for use within a variety of snowblowers and snowblower tractor attachments. The worm gear is used to rotate the auger through the drive mechanism, also known as the transmission. Featuring an approximately 2-inch diameter, this worm gear is made of high-quality, durable metal and is sold as an individual part. The worm gear will likely be secured in place using bolt or other fastener, and replacing this gear will require a wrench set and screwdriver. Make sure to check any user manuals or diagrams for exact placement of the worm gear within your snowblower.
Snow Blower V-Belt – Part Number: 954-04050A
$32.63
In Stock
Snow Blower V-Belt
Part #954-04050A
This V-belt is designed for various makes and models of snowblowers and is a genuine OEM part made of high-quality rubber. It powers the auger and impeller from the transmission and fits within V-shaped grooves on pulleys. This belt measures 35 inches in length and .5 inches in top width. Belts can stretch and become worn over time and lose their tension or break, thus requiring eventual replacement. It is recommended that you inspect the belts within your snowblower regularly to maintain the best performance from them and your snowblower and to avoid having to fix them during a snowstorm. To replace this belt, first, you must disconnect the spark plug. Using a socket wrench, remove the belt cover from your snowblower, if applicable. Once the cover is removed, remove the belt guide, which is used to prevent the belt from slipping off the pulley. Then release the tension on the auger cable by loosening its nut and disconnecting it from the main handle. You can then access and remove the auger V-belt by removing the securing screws holding the snowblower together. Clean the pulleys and attach the new belt, and then while holding the belt, bring the snowblower together and pull the belt around each pulley and secure the snowblower together. Reconnect the auger cable and add tension to it by tightening the nut, connecting the belt guide over the belt, and securing the belt cover and spark plug.
Snow Blower Drive Clutch Cable – Part Number: 946-04229B
$34.01
In Stock
Use 712-0417a – Part Number: 712-0417A
$9.99
In Stock
Use 712-0417a
Part #712-0417A
Wsh, Bell., .34 x .872 x .06 – Part Number: 736-0242
$6.74
In Stock
Wsh, Bell., .34 x .872 x .06
Part #736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damaged, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.
Snow Blower Lower Chute – Part Number: 731-06440A
$68.05
On Order
Snow Blower Lower Chute
Part #731-06440A
Washer-lock 5/16 – Part Number: 936-0119
$6.57
In Stock
Washer-lock 5/16
Part #936-0119
This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual
13 - 24 of 416