76540 Kohler Engine - Parts

This air cleaner/filter cover kit is supplied by the original manufacturer for use in lawn mowers. It includes one plastic cover, and the necessary mounting hardware - one knob, one seal and two metal brackets. The cover prevents moisture and debris from entering the air cleaner housing and damaging the air cleaner. The air cleaner cover ...Read morewill need to be replaced if it becomes cracked, damaged, or loose, to prevent contaminants from entering the engine. A faulty air cleaner cover will result in low power output, increased fuel consumption, engine stalling, and engine damage if left unaddressed. Remove the fasteners that secure the cleaner cover and pull it off the equipment. Clean the air filter housing and replace the air filter if necessary. It is recommended to inspect and replace the air filter every 3 to 6 months for optimal engine performance. Align the new cover with the mounting holes and secure it in place using the appropriate fasteners.

This is a genuine, air cleaner bracket from the Bosch manufacturer. The metal bracket is compatible with many lawn and garden engines. This item secures the air cleaner elements to the air cleaner base. It is recommended to refer to the specific manual and diagrams for repair instructions. This part is sold individually. A screwdriver is helpful in the removal and replacement.

This is an authentic OEM component from Kohler. The oil cooler o-ring is made for use with many small engines, and is sold individually. The plastic o-ring is fitted inside the oil cooler, providing a protective seal. An Allen wrench and pliers are often required for the proper installation.

This air cleaner cover is designed for small engines to protect the air filter from dirt, debris, and damage during operation. Built for a secure, precise fit, it helps maintain proper airflow and supports consistent engine performance. It’s a simple, direct replacement for restoring air filter protection when the original cover is cracked, loose, or missing.

This low-permeating fuel hose is a genuine OEM replacement designed for use on small engines. It carries fuel safely and efficiently from the tank to the carburetor while minimizing fuel vapor loss and resisting degradation from modern gasoline blends. Made from durable, fuel-resistant material, it’s intended to be cut to length during in...Read morestallation and is an ideal replacement when original fuel lines become brittle, cracked, or start leaking, helping restore safe and reliable engine operation.

This is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The ignition module is designed to deliver pulses of high voltage to the spark plug, please make sure to refer to the appropriate diagrams of your model for the correct location and ap...Read moreplication of this part. Unfortunately, over time, components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually.

This breather seal, also known as a breather vent or plug, is used within the engines of various power equipment models. It is used to regulate pressure, protect against dirt, debris and excess moisture, and extend the overall life of the engine it is in. Measuring 1-inch long and approximately 0.5-inches in outer-diameter, this breather seal is a part from the original equipment manufacturer.?

Throttle Cable Clamp

This control cable assembly transfers user input to internal mechanisms for controlled operation. Designed for flexibility and strength, it supports smooth response and reliable engagement.

This is a genuine OEM sourced replacement part that is intended to be used with small engines from Kohler. The metal screw is used to secure the air cleaner bracket to the base of the air cleaner assembly. A screwdriver is needed to install this item. The screw is sold as an individual replacement part.