My Orders
- Home
- 7576335300
- Instructions
7576335300 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
igniter failed
4 of 8 people
found this instruction helpful.
-
Michael from Chaska, MN
- Really Easy
- 15 - 30 mins
-
Nutdriver
take broiler oven door off. replaced the wire clip on one side of the two wire harness. on the other side, I clipped the other wire, used the wire sripper too strip each side of the wires and used the ceramic wire nut that came with the kit. I did not have to remove any part of the stove for this job. twisted the wire nut on, and my job w
... Read more
as done ! replaced the broiler door and you finally are able to cook your famous meat loaf ! Mike
Read less
Was this helpful?
Thank you for voting!
Oven wouldn't light.
1 person
found this instruction helpful.
-
Thomas from ELMIRA, NY
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
My existing igniter glowed but the oven still did not light. I determined it was too weak to activate the gas valve so I replaced it. Simple fix, four screws, wire nutted the two leads. Fired right up, took about 30 minutes to replace.
Was this helpful?
Thank you for voting!