7524ES ((1696564-00)(2015)) Murray Snow Blower - Parts

This part is an OEM from Craftsman for use with Snow Blowers. The extension spring is used to provide tension between the link rods, and disconnect arm which slows the riding lawnmower down when the speed control is pushed. The most common reason for replacing the spring is if the drive belt does not have enough tension to engage the auge...Read morer pulley because the spring is broken. This part is sold individually. The tool that you will need to replace the extension spring is a socket wrench.

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

It is an authentic OEM sourced item which is specially produced for use with Murray, Snapper, and Simplicity snowthrowers. The axle bearing fits between the axle shaft and the flatwasher and helps to reduce friction. During the installation process, a screwdriver and a wrench set might be needed to replace this part. It may become broken ...Read moreand will need to be replaced. This is made of metal and is available as an individual replacement part.

This is a genuine OEM sourced replacement hardware designed for use with snowblowers. Shear bolts are installed in order to protect your unit. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. It is made from metal and it is sold individually. You will need a wrench to remove or install this bolt.

This is an authentic manufacturer-sourced replacement flat washer which is specially produced for use with Murray lawn and garden equipment. It helps to distribute the pressure evenly between connected pieces, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. This high-quality metal washer is sold individually.

The oil seal goes between the gear case and the flange bearing. This authentic item is supplied directly from the original equipment manufacturer for use with snowblowers made by Murray and Simplicity. The part is sold individually and is made of metal and rubber. A screwdriver might be helpful during the installation of this part. It will need to be replaced if it breaks or loses its seal.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

Used to hold a shaft with a mating part, such as a gear, this Woodruff Key is sourced directly from the original manufacturer, is made of metal, is grey, and is sold individually, not as part of a kit or assembly. When this part becomes broken or damaged, it should be replaced. You may notice the mating shaft or gear will no longer rota...Read morete together if the part is malfunctioning. Customers rated this repair as Easy.

The washer goes between the bearing and the intermed sprocket. It is available as an individual replacement part. This item is an OEM from Murray, Snapper, and Simplicity for use in snowblowers. A wrench might be needed during the installation process. It is made of metal and will require replacing if it bends or breaks.