74504 - Parts

This is an authentic Toro replacement part manufactured for use with lawn tractors. The special insulator bushing is used to seal the fitting between the fuel valve and the fuel tank and to prevent damage to either part. This bushing is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine Toro replacement part. The friction washer is designed by the manufacturer for use in lawn tractors. This part is used to help secure the idler arm and apply friction to its motion. You will require a wrench when replacing this item. This part is sold individually.

This is a genuine Toro replacement part. The clip is commonly found in snowthrowers and lawn tractors. This part is made of metal, and is generally used to secure plate-like components in place. It may be used in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct ...Read morepart. You may require a wrench or screwdriver when replacing this part. This item is sold individually.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine manufacturer-sourced component which is specially made for use with Toro snowthrowers. It is a standard hardware which may have multiple applications. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind it is a high-quality component is ...Read moremade of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This lock nut is used to secure threaded fasteners, to prevent them from loosening and falling off during use. It is sourced from the original manufacturer for use in various lawn and outdoor equipment. The nut has a nylon insert on one end which holds the fastener and locks the nut in position. It comes in a hexagonal shape, which makes ...Read moreit easier to grip, and ensures better stability. It is normal for a lock nut to corrode, crack or wear down over time. You will likely notice increased vibration, noise, and instability from your equipment when the nut is no longer able to securely hold the fastener. To remove and replace a lock nut, nut use a wrench or socket. Regularly inspecting and replacing the lock nuts in your equipment is important in maintaining the longevity of the equipment. Each nut is sold individually.

This item is priced individually. The flat washer goes next to the hub cap and is made of metal. During the installation process, a wrench might be needed to replace this part. It will need to be replaced if it bends or breaks. This is a genuine Toro part sourced directly from the manufacturer for use in lawn mowers and lawn tractors.

This Belleville washer, also called a disc spring or conical spring washer, is a component in your lawn equipment that distributes load and keeps tension in check in areas where controlled compression is needed such as in suspension systems and blade assemblies. If the washer is damaged, showing signs of deformation, cracks, or warping, y...Read moreour machine will have no cushioning between their parts and your machine will wear out faster. Use a pair of pliers or a flathead screwdriver to remove a washer from your machine. If it is stubborn, apply some penetrating oil to help loosen it. Remember to consult your user guide to determine how many washers you need and where they are in your machine. Since these washers are sold individually, it is strongly recommended that you replace all your washers in one go as they wear out at the same rate.

This high-quality OEM sourced replacement hardware is specially made for use with Toro lawn and garden equipment. It is a standard hardware that may have multiple applications. Check the appropriate diagrams of your model for the exact location and application of this component. This high-quality screw is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This Belleville washer, also known as a Belleville spring, is a type of cone/cup shaped washer, used in lawn and outdoor equipment. It is a thin, metal disc that tapers towards the center and functions like a spring when it is compressed. When a load is placed on the washer, the spring is engaged, and this allows it to absorb shocks and p...Read morerevent loosening and leakages while the equipment is running. It is used in places that have heavy loads and require the maintenance of high tension, such as, under the head of a fastener or in between two equipment parts. Over time, the Belleville washer can crack or become deformed leading to a loss of tension, excessive vibration, instability, and falling parts. If you are positioning the washer under a fastener, first remove the fastener before removing the faulty washer, and if it is between two components, you may first need to disassemble the components. Each washer is sold separately.