74441 - Parts

This head gasket is an original manufacturer replacement part for power equipment. It is a seal that sits in the area between the cylinder head and engine block. It is responsible for preventing air and fuel from escaping during the combustion process, which allows the engine to run. Over time it is normal for the gasket to wear down due ...Read moreto friction, exposure to heat and aging. However, if the gasket is not properly installed it may fail prematurely. If you notice that your engine is overheating, misfiring, releasing white smoke and your equipment has low power, the head gasket likely needs to be replaced. To access the faulty gasket, you will need to first remove the cylinder head. Carefully lift the gasket off and clean the mating surfaces to remove dirt, debris, and residue. Position the new gasket on the engine block and secure it with the appropriate fasteners.

It is a genuine OEM item that is made for Toro lawn and garden equipment. This is a special component which helps to provide a tight fit between connected parts. Unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. This high-quality bushing is made of durable material and is sold as an individu...Read moreal item. To ensure the proper repair procedure, check the parts diagrams for your specific model.

This genuine Kawasaki fuel pump is an OEM-sourced replacement part designed to ensure reliable performance and quality. It is intended for use with small engines and plays a vital role in circulating fuel through the system by responding to pressure changes within the engine. Built for durability and consistent operation, this fuel pump i...Read mores sold individually and is ideal for restoring proper fuel flow in compatible engine models.

This gasket is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on a variety of lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the manifold. Over time it may wear out and begin to crack eventually requiring a replacement. For the exact loca...Read moretion and the correct application, please refer to the appropriate diagrams of your model. This high-quality gasket-manifold is made of durable composite material and is sold as an individual component. You will need a wrench set to remove and reattach the manifold when performing this repair.

This fuel return hose is a genuine OEM replacement used on small gasoline engines to route excess fuel back to the tank, typically as part of the carburetor purge system. Made from flexible, durable material, it helps ensure proper fuel circulation and smooth engine operation and is an ideal replacement when the original hose is cracked, hardened, or leaking, which can cause starting issues or poor running.

This is half of a collet. You will need to order two to receive a whole collet.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

A muffler gasket, also known as an exhaust gasket, is a seal between the exhaust manifold and muffler within an engine, and it is used to reduce vibrations and noise, and prevent exhaust leaks. This gasket is sold as an individual part and is designed for use within lawn mowers, tractors, and various other types of engines. If you notice ...Read moreor smell fuel, increased noise or vibrations, and/or black carbon buildup around the gasket, muffler, or exhaust, then the muffler gasket is likely worn down or damaged and in need of replacing. Regular maintenance and inspections can prevent further any further damage, and help you identify issues earlier. To replace this gasket, you will likely need a socket wrench and screwdriver to remove the muffler and replace the gasket.

This Nut is a black, metal, individually sold part. Certified by the original equipment manufacturer, it can be installed with a wrench or socket and torque wrench by torquing to the manufacturer specficiations, and is rated as Easy to install by customers for multiple applications on different equipment. If damaged, the threads will be...Read more damaged or the edges will be rounded off, and it must be replaced. Refer to your owners manual to see if this part is right for you.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The ni lock nut is designed to prevent from being unthreaded from vibration. This nut is used with several different models of snowthrowers and is used with various applications. The nut is sold as an individual replacement part, please see model diagram for associative parts.