74409 - Parts

This electric PTO switch provides safe, reliable control for engaging and disengaging mower decks and powered attachments. The push-pull design with a bright yellow knob allows for clear visual confirmation and easy operation from the operator’s seat, while the snap-mount style supports secure installation. Built with multiple terminals t...Read moreo handle mower electrical systems, this switch is ideal for replacing a failed or inconsistent PTO control to restore dependable deck engagement and smooth, controlled mower operation.

This OEM lock nut is used in your lawn equipment to keep its parts securely fastened and prevent them from coming loose. It is often found at the end of a threaded bolt. This lock nut has a nylon insert inside and a diameter of 3/4 inches. Over time, the lock nut can wear out due to regular use. When this happens, you may hear strange kno...Read morecking or rattling noises coming from your machine. You may also feel more vibrations from it than usual. If you take a close look at the nut, it might appear bent or deformed. If you do not replace a worn-out lock nut, the parts of your machine can fall off. To replace a lock nut, you need a socket wrench to loosen it from your machine. Since this lock nut is sold individually, consult your instruction manual to determine how many your machine needs. If you are replacing one lock nut, it is recommended that you replace all of them as they tend to wear out at the same time.

This metal plate, is an authentic manufacturer replacement part used in outdoor power equipment as a part of the governor assembly. It is one of the two plates attached to the end of the camshaft which plays a key role in regulating the engine speed. When the engine speed increases or decreases, the plates are forced outward or inward, th...Read moreereby actuating the throttle and controlling the amount of air and fuel that enters the engine. This process allows the engine to maintain a consistent speed. If the plates become damaged or dislodged, you will notice fluctuating engine speed and poor load response. Before removing the plates, first disconnect the springs and linkage attached to them. Detach the plates from the camshaft and position the new ones in place.

This governor plate, also known as the governor control, is supplied by the original manufacturer for use in a variety of outdoor power equipment. It is a metal plate that works with the throttle linkage to allow the engine to maintain a consistent speed during operation. If the governor plate wears down or becomes damaged, you will notic...Read moree that the engine will stall under load, and the revolutions per minute (RPM) in your equipment will fluctuate, causing over-speeding or under-speeding as well as inconsistent power output, and performance. Therefore, it is critical to replace this part if it is no longer working, in order to continue operating your equipment. You can find the governor plate near the throttle linkage assembly in your equipment engine. Depending on your model, you may need to remove the air filter housing to access the plate. Disconnect the throttle linkage from the governor plate and remove the faulty governor plate. Place the new one in position, secure it with the appropriate fasteners, and reverse-assemble the rest of the engine components to complete your repair.

It is a genuine OEM sourced replacement part that is specially produced for use with Kawasaki engines commonly installed on lawn and garden equipment. This item fits the opening in the crankcase helps to provide an air tight seal to prevent any leaks. Over time seals tend to get compressed and may begin to deteriorate eventually requiring replacement. It is made of durable rubber material and it is sold individually.

This spring is an OEM direct from Kawasaki. The metal spring is compatible with many 4 stroke engines. This item provides the necessary resistance to the governor arm, and is sold individually. Pliers, wrench and a socket set are often needed for the repair process.

This bolt is generally used to secure muffler on engines. It is supplied from original equipment manufacturer for use with Kawasaki gas powered engines. This bolt has a hex head which requires a wrench for installation. Please note it is sold individually.

This is an authentic OEM sourced replacement screw which is specially produced for use with Toro snowthrowers. It is one of the screws used to secure the auger, please refer to appropriate diagrams for the correct location and application of this hardware. This hex head screw is made of high-quality metal and it is sold individually.