74176 Toro Lawn Mower - Parts

This O-ring, also known as a round seal, is an authentic OEM part used in lawn and garden equipment. It is a small, circular, rubber ring that helps create an airtight seal between the oil filter filler and engine to prevent leaking and ensure adequate lubrication. It is common for the O-ring to become brittle and lose its elasticity due ...Read moreto aging, and exposure to chemicals and high temperatures in the equipment. If an O-ring fails, it can result in oil leakage, leading to reduced equipment performance, and potential damage to the surrounding components. Carefully the oil ring off the sealing surface and clean the area thoroughly to ensure a proper seal for the new O-ring. Lightly lubricate the new O-ring and press it on to the sealing surface.

This part is an OEM from the Kawasaki manufacturer. The plastic, hook-hook & joint set is compatible with many lawn and garden engines. This item is fitted onto the case-assy-air filter, and has been designed to hold the air filter housing together. This part is sold individually. The case-assy-air filter (11038-70130) also includes the h...Read moreook-hook & joint set. A wrench and a screwdriver is helpful in making the repair.

This muffler gasket is supplied directly from original equipment manufacturer. It is commonly used with Kawasaki engines. Its designed to create an air tight seal between the muffler and the pipe. Over time gaskets tend to deteriorate allowing for leaks. At this point it should be replaced. This gasket is made out of composite material an...Read mored it is sold individually. This is a simple repair that should only require a screwdriver and a wrench.

This genuine Kawasaki fuel pump is an OEM-sourced replacement part designed to ensure reliable performance and quality. It is intended for use with small engines and plays a vital role in circulating fuel through the system by responding to pressure changes within the engine. Built for durability and consistent operation, this fuel pump i...Read mores sold individually and is ideal for restoring proper fuel flow in compatible engine models.

This high-quality manufacturer-sourced part is made for use with Kawasaki engines commonly installed on lawn and garden equipment. It helps to provide a tight seal between the crankcase and the crankshaft. Over time it may wear out and begin to crack eventually causing oil leaks and requiring a replacement. This high-quality seal is made ...Read moreof durable rubber material and is sold as an individual component. You will need a wrench set to take the engine apart and perform the repair. For the exact location and the correct installation, refer to the appropriate diagrams of your model.

This item has been sourced from the original manufacturer to be used with small engines from Kawasaki. The gasket is used to seal the connection between the crankcase and the crankcase cover. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This item is sold as an individual replacement part.

This is an authentic OEM approved replacement filter element generally used on Kawasaki small engines. It is designed to filter out dust and dirt from contaminating engine. This is a pleated paper filter with plastic and metal base. Includes one (1) filter per order. Please note pre-filter is sold separately. Replacing this air filter el...Read moreement is easy and it does not require any tools. • Remove filter cover • Unscrew the wing nut that secures filter element • Replace old filter with a new one • Reassemble in reverse order

This is half of a collet. You will need to order two to receive a whole collet.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.

This Nut is a black, metal, individually sold part. Certified by the original equipment manufacturer, it can be installed with a wrench or socket and torque wrench by torquing to the manufacturer specficiations, and is rated as Easy to install by customers for multiple applications on different equipment. If damaged, the threads will be...Read more damaged or the edges will be rounded off, and it must be replaced. Refer to your owners manual to see if this part is right for you.