Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The glass shattered & needed to be replaced
2 of 4 peoplefound this instruction helpful.
David from HAMPTON, GA
Very Easy
Less than 15 mins
Just popped it in, just as easy as that!
Was this helpful?
Thank you for voting!
Broken spring on flapper door
1 personfound this instruction helpful.
Richard from IMPERIAL, CA
Very Easy
15 - 30 mins
Screw drivers
Unplugged the frig and removed two phillip screws on flapper door of left door... Unplugged the electrical connector and removed flapper... Picked up new flapper and snapped electrical contractor together... Slid new flapper bar into place and inserted two phillip screws... Job complete in 15 minutes...
Was this helpful?
Thank you for voting!
Old part did not seal properly
1 personfound this instruction helpful.
Donald from MERRITT IS, FL
Really Easy
Less than 15 mins
Screw drivers
Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.
Was this helpful?
Thank you for voting!
Spring broken in door mullion
1 personfound this instruction helpful.
Wayde from SEMINOLE, FL
Really Easy
Less than 15 mins
Screw drivers
Took 2 screws out and disconnect wire and install new part.
Was this helpful?
Thank you for voting!
Previous glass shelf shattered into a million pieces while cleaning.
1 personfound this instruction helpful.
Susan from SAFETY HARBOR, FL
Really Easy
Less than 15 mins
Just laid the shelf down. Fit like a glove!
Was this helpful?
Thank you for voting!
Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.
1 personfound this instruction helpful.
Robert from WARREN, RI
Very Easy
Less than 15 mins
Screw drivers
Followed Youtube video provided on the PartsSelect Website:
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
Was this helpful?
Thank you for voting!
The spring on the mullion was broken so the mullion would not open to seal the other door.
1 personfound this instruction helpful.
JANET from GRAND JCT, CO
Very Easy
Less than 15 mins
Screw drivers
I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.
Was this helpful?
Thank you for voting!
Ice tray cracked
1 personfound this instruction helpful.
Eugene from ENCINITAS, CA
Really Easy
30 - 60 mins
Screw drivers
Removed the old one and replaced with new just remember do your do diligence watch YouTube videos makes repair a lot easier
Was this helpful?
Thank you for voting!
Icemaker not working
1 personfound this instruction helpful.
Franck from ST PETE BEACH, FL
Really Easy
30 - 60 mins
Screw drivers
Removed ice bin Unscrew the 3 screws. Lift ice maker for the bottom to remove it but do not pull it until the power is unplug from the part. Install the new part the same way you removed the old part. Turn the switch and waiting 48 hours before the ice bin start getting ice
Was this helpful?
Thank you for voting!
cracked bottom on door shelf bin
1 personfound this instruction helpful.
Sal from Atlantic beach, NY
Very Easy
30 - 60 mins
removed cracked one and install new part without tools.
The glass was ordered correctly. The part was too big for mt refrigerator. I tried to send it back, but I got no reply. I tried cutting the glass to size and it shattered. I wasted 60.00 and im disgusted with your company.
Was this helpful?
Thank you for voting!
Ice tray was not rotating any longer
1 personfound this instruction helpful.
Angela from SAINT JOSEPH, MO
Easy
15 - 30 mins
Screw drivers
Took the old one out and put the new one in.
Was this helpful?
Thank you for voting!
The original spring in the mullion door broke
1 personfound this instruction helpful.
John from ELLWOOD CITY, PA
Easy
30 - 60 mins
Screw drivers
I disconnected the refrigerator power, removed the 2 screws holding the mullion door on the left side of the refrigerator French-door (it’s the flap that allows the door to close). Removed the broken spring and installed the replacement spring in its place. Reinstalled the mullion door by putting it in place and installing the previously
... Read moreremoved screws.
Read less
Was this helpful?
Thank you for voting!
Lower ice maker water feed froze and caused leak. Needed new water valve.
2 of 5 peoplefound this instruction helpful.
Thomas from YORKTOWN, VA
Really Easy
15 - 30 mins
Pliers, Screw drivers
Took pics of original install, removed old valve, water tubes & plugs. Installed new valve, reconnected electronic plugs, water tubes, turned water back on and all has been well since. Thank you for your timely delivery!
My Orders
