73053 (ASTCSE1) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice tray cracked
1 person
found this instruction helpful.
-
Eugene from ENCINITAS, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Removed the old one and replaced with new just remember do your do diligence watch YouTube videos makes repair a lot easier
Was this helpful?
Thank you for voting!
Icemaker not working
1 person
found this instruction helpful.
-
Franck from ST PETE BEACH, FL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Removed ice bin
Unscrew the 3 screws.
Lift ice maker for the bottom to remove it but do not pull it until the power is unplug from the part.
Install the new part the same way you removed the old part.
Turn the switch and waiting 48 hours before the ice bin start getting ice
Unscrew the 3 screws.
Lift ice maker for the bottom to remove it but do not pull it until the power is unplug from the part.
Install the new part the same way you removed the old part.
Turn the switch and waiting 48 hours before the ice bin start getting ice
Was this helpful?
Thank you for voting!
cracked bottom on door shelf bin
1 person
found this instruction helpful.
-
Sal from Atlantic beach, NY
- Very Easy
- 30 - 60 mins
removed cracked one and install new part without tools.
Other Parts Used:
Was this helpful?
Thank you for voting!
The spring on the mullion was broken so the mullion would not open to seal the other door.
1 person
found this instruction helpful.
-
JANET from GRAND JCT, CO
- Very Easy
- Less than 15 mins
-
Screw drivers
I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.
Was this helpful?
Thank you for voting!
Removed old part.
1 person
found this instruction helpful.
-
Steve from NORTH AURORA, IL
- Very Easy
- Less than 15 mins
-
Screw drivers
Installed new one.
Was this helpful?
Thank you for voting!
Spring broken in door mullion
1 person
found this instruction helpful.
-
Wayde from SEMINOLE, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Took 2 screws out and disconnect wire and install new part.
Was this helpful?
Thank you for voting!
Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.
1 person
found this instruction helpful.
-
Robert from WARREN, RI
- Very Easy
- Less than 15 mins
-
Screw drivers
Followed Youtube video provided on the PartsSelect Website:
https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST
Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.
Was this helpful?
Thank you for voting!
Old part did not seal properly
1 person
found this instruction helpful.
-
Donald from MERRITT IS, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.
Was this helpful?
Thank you for voting!
cannot get water to the icemaker
1 of 2 people
found this instruction helpful.
-
PAUL from AMARILLO, TX
- Very Difficult
- More than 2 hours
-
Nutdriver
i changed the filter and was able to get water to the white coil at the bottom of the dispenser (left door) but could never get water to the icemalker.i also replaced the pump at the bottom of the door as well as the green ebr699172 dispenser electrical board.still can not get water to the icemaker.any help will be greatly appreciated.<
... Read more
br />paul
Read less
Was this helpful?
Thank you for voting!
Ice maker was broken
1 of 2 people
found this instruction helpful.
-
luis from DIAMOND BAR, CA
- Really Easy
- 30 - 60 mins
-
Screw drivers
I just followed the instruction on the part , and everything was very easy.
Was this helpful?
Thank you for voting!
Lower ice maker water feed froze and caused leak. Needed new water valve.
2 of 5 people
found this instruction helpful.
-
Thomas from YORKTOWN, VA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Took pics of original install, removed old valve, water tubes & plugs. Installed new valve, reconnected electronic plugs, water tubes, turned water back on and all has been well since. Thank you for your timely delivery!
Was this helpful?
Thank you for voting!
Ice Maker and Water dispenser stopped working
1 of 2 people
found this instruction helpful.
-
Donald from BETHPAGE, NY
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Pulled the fridge out.
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.
Super SImple/
Unscrewed the back cover and the one screw holding the value assemble.
undid the 2 hoses and replaced the part.
Super SImple/
Was this helpful?
Thank you for voting!
Slow water for drinking
1 of 3 people
found this instruction helpful.
-
Steven from SEBASTIAN, FL
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench set
Just like on YouTube very easy to do
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 people
found this instruction helpful.
-
Steve from MUKWONAGO, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 people
found this instruction helpful.
-
Homer from MARION, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!