All Installation Instructions for 7230

Spring broken in door mullion

1 person found this instruction helpful.

Wayde from SEMINOLE, FL
Really Easy
Less than 15 mins
Screw drivers

Took 2 screws out and disconnect wire and install new part.

Was this helpful?

door slight switch failed

1 person found this instruction helpful.

Greg from CASA GRANDE, AZ
Really Easy
Less than 15 mins
Pliers

Covered the sidewall with tape to protect. Pried the switch out with knife blade and removed electric plug with needle nose pliers. placed plug in new switch and pushed switch into the hole in the side wall. Took about five minutes.

Was this helpful?

The spring on the mullion was broken so the mullion would not open to seal the other door.

1 person found this instruction helpful.

JANET from GRAND JCT, CO
Very Easy
Less than 15 mins
Screw drivers

I am a73 year old woman. If I can do this, anyone can. Super easy. Just watch the online video.

Was this helpful?

Removed old part.

1 person found this instruction helpful.

Steve from NORTH AURORA, IL
Very Easy
Less than 15 mins
Screw drivers

Installed new one.

Was this helpful?

Old part did not seal properly

1 person found this instruction helpful.

Donald from MERRITT IS, FL
Really Easy
Less than 15 mins
Screw drivers

Read the reviews from other members and just did as they said. Needed a screw driver and the info from past persons review couldn’t have been easier.

Was this helpful?

Spring in the plate front assembly broke. Door plate assembly would not move into correct position, preventing door from closing.

1 person found this instruction helpful.

Robert from WARREN, RI
Very Easy
Less than 15 mins
Screw drivers

Followed Youtube video provided on the PartsSelect Website:

https://www.partselect.com/PS12374439-LG-AGU75188619-PLATE-ASSEMBLY-FRONT.htm?Inventory=12374439&SourceCode=20&SearchTerm=LFX28979ST

Made installation of the new part a piece of cake. Easy peasy!! Took less than 10 minutes.

Was this helpful?

The switch became intermittent - Possibly a poor designe

1 person found this instruction helpful.

Sidney from ENDICOTT, NY
Very Easy
Less than 15 mins
Screw drivers

Used a small screw driver inserted into the front of the switch (facing the front) and pried until the switch was coming out. When out, I removed the connect harness and replace the switch with a new one.

Was this helpful?

Door light switch, 3rd one I have replaced in 6 years made in China.

1 person found this instruction helpful.

Charles from CURWENSVILLE, PA
Really Easy
Less than 15 mins
Pliers, Screw drivers

Easy install, small screwdriver under back of old switch push out and pull out with small pliers. unsnap the old plug and install new. YOUR DONE

Was this helpful?

Replace switch

1 person found this instruction helpful.

Dean from HILLSDALE, MI
Really Easy
Less than 15 mins
Screw drivers

Read previous tips
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape

Was this helpful?

Replace the light switch for the refrigerator

1 of 2 people found this instruction helpful.

Karyn from DURHAM, NH
Really Easy
Less than 15 mins

Cover the putty knife with tape so you do not scratch the side wall where the switch is located. Slide the knife under the edge of the switch and push in a bit towards the switch and slightly twist to pop the switch out of its hole. Disconnect the wires from the switch and simply plug in the new switch. Push wiring back into the hole and ... Read more

Read less

Was this helpful?

the light did not work when door was opened. At first it would flicker then off completely.

1 of 2 people found this instruction helpful.

Alma from Winterport, ME
Very Easy
Less than 15 mins
Screw drivers

My son just pried out the old switch with a screw driver snapped out the old one and snapped in the new one. Pretty sure even I could have done this. Very quick and easy. Thanks. :-)

Was this helpful?

cannot get water to the icemaker

1 of 2 people found this instruction helpful.

PAUL from AMARILLO, TX
Very Difficult
More than 2 hours
Nutdriver

i changed the filter and was able to get water to the white coil at the bottom of the dispenser (left door) but could never get water to the icemalker.i also replaced the pump at the bottom of the door as well as the green ebr699172 dispenser electrical board.still can not get water to the icemaker.any help will be greatly appreciated.< ... Read more

Read less

Was this helpful?

Refrigerator light had a short in it and would randomly work

1 of 3 people found this instruction helpful.

Tammy from HAGERSTOWN, MD
Very Easy
Less than 15 mins
Screw drivers

Unplugged the fridge. Used a screwdriver to loosen the switch. Easy to disconnect from fridge and just plugged the new switch in. Popped right back into the side of the fridge and worked perfectly.

Was this helpful?

Unit kept beeping as if the freezer door was open

0 of 1 people found this instruction helpful.

Paul from San Jose, CA
Really Easy
Less than 15 mins
Pliers

I popped the old switch out of place and then disconnected the wire harness from the switch with a pair of needle nose pliers. I then inserted the harness into the new switch and popped the switch into place. Super easy and fast.

Was this helpful?

light out

0 of 1 people found this instruction helpful.

Jack from Ellenton, FL
Easy
Less than 15 mins
Screw drivers

slid screw driver under edge of switch, easy.

Was this helpful?

7230 - Instructions