72180602500 Kenmore Microwave - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave would not heat food, but everything else worked.
Problem was a faulty door latch switch. I easily accessed the switch by removing the control panel, total of 4 screws. After that, just disconnected the three switch door latch assembly and connected the new one. Took about half an hour and was very easy. Unit works perfectly now.
Parts Used:
-
Samuel from Daleville, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
House wiring failure caused excessive voltage to microwave
Disassembled control panel and checked power transformer windings. Primary winding fried. Patched power to magnatron transformer to make sure it was ok. Removed power transformer and checked diodes and transistors on board which were ok. Installed new transformer and reassembled control panel to microwave. Checked functions.
Parts Used:
-
Douglas from Missoula, MT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!