72144 - Parts

The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air conditioner is not operating properly, you will need to replace it with this part. This fan assembly has 5 blades and is approximately 14-1/...Read more2 inches in diameter. It is made of white plastic. You will need to open your air conditioner, and most likely remove it from the wall/window to complete this repair. Be sure to disconnect power to the unit before you begin this repair.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This spring clamp is designed for your room air conditioner. This clamp holds the fan blade on the motor shaft so it can rotate during operation. If your fan blade is wobbling on the motor shaft, you may need to replace it. The part is made of metal and is approximately 3/4-inch in diameter. This is an OEM part sourced directly from the m...Read moreanufacturer. This spring clamp is sold individually. Before you begin this repair, make sure your air conditioner is disconnected from the power source. To complete this repair, you will likely need to remove the air conditioning unit from the wall.

If your air conditioner is not blowing cold air, the problem may be in the capacitor. If the capacitor fails, the compressor will not start and the fan will only blow warm air. The compressor and capacitor are located inside the cabinet and to gain access you will need to remove the cover. If the capacitor does not show any visible signs ...Read moreof damage you may require a qualified technician to test it. Make sure that the replacement capacitor has the same specifications as the original. NOTE: Because capacitors carry a charge even when the unit is disconnected from the power, use extra caution when performing this repair.

This part is the replacement air filter for your room air conditioner. It is framed by white plastic and is approximately 18 inches wide and 8.5 inches long. The air filter protects your home from airborne dirt, dust, and other particles. If the air filter is damaged, it can allow these particles to pass through, and become distributed ar...Read moreound your home. A damaged air filter will need to be replaced. This part is sold individually and is an OEM part sourced directly from the manufacturer.

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This carriage screw is a genuine manufacturer sourced replacement part. It is specially designed for use with Toro snowblowers. This screw is generally used to secure the scraper blade. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the screw and keeps it from t...Read moreurning when the nut is tightened. Please note, this screw is made out of metal and it is sold individually.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.