72074 - Parts

This Belleville washer, also called a disc spring or conical spring washer, is a component in your lawn equipment that distributes load and keeps tension in check in areas where controlled compression is needed such as in suspension systems and blade assemblies. If the washer is damaged, showing signs of deformation, cracks, or warping, y...Read moreour machine will have no cushioning between their parts and your machine will wear out faster. Use a pair of pliers or a flathead screwdriver to remove a washer from your machine. If it is stubborn, apply some penetrating oil to help loosen it. Remember to consult your user guide to determine how many washers you need and where they are in your machine. Since these washers are sold individually, it is strongly recommended that you replace all your washers in one go as they wear out at the same rate.

This is an authentic HHHH replacement part, sourced from the original manufacturer for use with outdoor power equipment. The special lock nut is used with several different types of equipment and the application of the nut can vary based on the model of the tool. This lock nut is available as an individual replacement part.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with outdoor power equipment. The woodruff key is used to link a shaft and pulley or gear to allow the either the pulley or gear to rotate along with the shaft. This woodruff key is available as an individual replacement part.

This carriage screw is a genuine manufacturer sourced part that is specially designed for use with Toro snowblowers. It is an identical replacement for a missing or a faulty hardware that was installed on a new unit. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrain...Read mores the screw and keeps it from turning when the nut is tightened. Please make sure to refer to the diagrams of your model for the correct location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The valve is part of the tire assembly and is used to regulate tire pressure by allowing air into the tire and preventing air from escaping. This valve is available as an individual replacement part.

This OEM lock nut is used in your lawn equipment to keep its parts securely fastened and prevent them from coming loose. It is often found at the end of a threaded bolt. This lock nut has a nylon insert inside and a diameter of 3/4 inches. Over time, the lock nut can wear out due to regular use. When this happens, you may hear strange kno...Read morecking or rattling noises coming from your machine. You may also feel more vibrations from it than usual. If you take a close look at the nut, it might appear bent or deformed. If you do not replace a worn-out lock nut, the parts of your machine can fall off. To replace a lock nut, you need a socket wrench to loosen it from your machine. Since this lock nut is sold individually, consult your instruction manual to determine how many your machine needs. If you are replacing one lock nut, it is recommended that you replace all of them as they tend to wear out at the same time.