7134 - Parts

This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move. If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.

It is an authentic replacement cap-spindle that is supplied by the original equipment manufacturer for use with Poulan, Ryobi and Husqvarna riding lawn mowers and garden tractors. It is an identical replacement for a missing or damaged cap that was originally installed on a new equipment. The cap is utilized to cover the spindle. Make sur...Read moree to check the appropriate diagrams of your model for the exact location and application of this hardware. This high-quality cap-spindle is made of durable plastic material and is sold individually.

This authentic manufacturer-supplied part is specially designed for use with riding lawn mowers and garden tractors. It is a special component that wheel axles attach to. This is an identical replacement for a missing or a damaged axle assembly front that was installed on a new unit. A wrench set will be needed to perform this repair. Mak...Read moree sure to refer to the owner\\\'s manual and the appropriate diagrams for your model to ensure the proper repair procedure. Note, this high-quality axle assembly front is made of durable metal and is sold individually.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman lawn tractors. The blade bolt is used to secure the mulching blade. In order to replace the bolt, a socket wrench will be needed to remove the bolt from the mulching blade. This part is made of metal and is sold individually.

This replacement mulching blade is supplied directly from original equipment manufacturer for use with riding lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes the grass clippings a better mulch that will decompose quicker releasing their nutrients into the soil. This blade is made from durable metal and it is sold individually.

This is a genuine replacement V-belt sourced directly from the original manufacturer, commonly used in a variety of lawn mower models. Made from durable rubber, this belt is responsible for driving the mower blades, making it a critical component for proper cutting performance. It is sold individually and should be replaced when worn, cra...Read morecked, or stretched to maintain optimal operation. Before installing the new belt, it’s important to clean the pulleys to ensure smooth performance and extend the belt’s lifespan. A set of wrenches is required to complete the installation. Regular inspection and timely replacement of the V-belt help keep your mower running efficiently season after season.

This is an OEM replacement part sourced directly from the original manufacturer. This Mandrel Housing is made out of Metal and it is Sold Individually. This is the part that Houses Shaft that mower blade attaches to, it is mounted to the deck of the mower by Three (3) Bolts (Sold Separately). Please note that the mounting holes on Mandre...Read morel Housing are not threaded. Bolts that are used to secure the Mandrel to the deck are self tapping. When doing this repair you would need a set of Wrenches. • First remove the Blade from the Mandrel Shaft • Remove the Three (3) Screws that are holding Housing to the Deck • Then, you will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. • Remove Shaft from the old Housing and place it in the new housing. Re-attach the now Complete Mandrel Assembly back to the deck. • Attach pulleys, belts and blades.

This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Weedeater, Poulan and Tecumsen. This part will apply pressure on the brake pad and dowel pins when the brake is being used to the stop tractor. It is recommended to review your models diagram to verify the parts compatibility. This break lever is sold individually and made of metal.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Craftsman lawn and garden equipment. This is an identical replacement for a missing or a faulty tractor lift assembly link that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this component. This high-quality assembly is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered, Poulan and Ryobi. This part allows the rod to swivel smoothly when the wheels are turning. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable material and sold individually.