71192 Toro Lawn Tractor - Parts

This rocker arm adjuster, or valve lash adjuster, is a genuine OEM replacement part used in lawn tractors. It is approximately one inch long and made of steel. It is responsible for adjusting the clearance between the rocker arm and valve stem, which allows the valves to open and close as needed. The adjuster will need to be replaced if t...Read morehe threads are stripped, or if it is cracked, or worn down. Remove the spark plug wire to prevent accidental starting and remove the valve cover from the engine to access the rocker arm. Detach the rocker arm and unthread the faulty adjuster. Screw the new adjuster into the rocker arm and use a feeler gauge to set the correct intake clearance. Reinstall the arm into the engine and return the valve cover to complete the repair.

This is a genuine OEM part. The Briggs & Stratton valve seal is used on many lawn tractor machines. The metal part stops oil from moving into the cylinder from the valve stem. This item is often fastened to the intake valve and the valve keeper. A screwdriver, socket set and wrench set are required for the installation. The metal valve seal is sold individually.

This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental or unauthorized use of the equipment. A broken key might be loose or hard to turn. In some cases, it might have completely fallen out of the...Read more switch. Without the ignition key, it will be difficult or impossible to start the engine. Locate your ignition key by reading your user manual. To remove a stuck ignition key, you may need to use a small amount of lubricant on it. While turning the key in the ignition switch, gently wriggle it back and forth. There may also be a release button that you could press, depending on your model type. This replacement part is an OEM product and is sold per unit.

The governor spring is made out of metal and helps to control the speed of the engine. This authentic item is supplied directly from the original equipment manufacturer for use with Briggs & Stratton generators and Toro snowthrowers, tillers, and blower-vacuums. If it becomes lost or broken it will need to be replaced. A nutdriver may be necessary to help replace this part which is sold individually.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal screw is used to secure the mower's blade to the drive shaft. This item may require a hex socket wrench to install and the bolt is sold individually.

This is a genuine Briggs and Stratton part for use with lawn and garden equipment engines. The rocker arm opens the intake and exhaust valves. The most common reason for replacing the rocker arm is if it is damaged, causing the engine to not run properly. This part is sold individually. Here is a list of tools that are needed to install t...Read morehe engine rocker arm a 10mm socket and socket wrench, flat-blade screwdriver, 13/16" spark plug wrench, safety razor, torque wrench, 9mm wrench, Hondabond silicone sealant and a feeler gauge.

This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.

This part is an OEM sourced directly from the manufacturer for use in lawn tractors made by Briggs & Stratton, Murray, and Toro. The star screw attaches to the connecting rod and is made of metal. It might require a torx screwdriver to replace this part if it becomes stripped or broken. This item is priced as an individual replacement.

It is a genuine item that is supplied by the original equipment manufacturer for use with Toro lawn mowers and garden tractors. This is an identical replacement for a missing or a damaged cap-hub that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and ap...Read moreplication of this hardware. Keep in mind this high-quality item is made of durable plastic and is sold individually.