71024PC (2012) MTD Snow Blower - Parts

This choke knob is an authentic OEM replacement part designed for snowblowers. It is a small plastic knob, measuring 2 inches in diameter. It restricts the airflow to the engine which enriches the fuel mixture and makes it easier to start the snowblower when the engine is cold. Depending on your exact model you can find the choke knob eit...Read moreher near the engine or on the control panel. Failure of the choke knob can occur due to wear, damage, or clogging. If the choke knob is damaged or worn down, you will have difficulties starting your snowblower, the engine may stall, and you will notice decreased performance from the snowblower. To remove the faulty choke knob, remove the clips or screws that hold it in place, and pull it off the shaft. Align the new choke knob with the shaft and secure it in place with the fasteners. Run your equipment and test the new choke knob to confirm that the choke can engage and disengage appropriately.

This is a genuine replacement part manufactured for use with outdoor power equipment. The flat metal washer has many applications, usually use to fasten other parts. The washer is sold individually, please see model diagram for part location, and usage.

It is a genuine manufacturer-supplied item that is designed for use with snowblowers. This is an identical replacement for a damaged or a missing clutch lock spring that was installed on a new unit. Keep in mind this high-quality component is made of durable metal and is sold as an individual item. A wrench set and pliers might be needed ...Read moreto perform this repair. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure.

Used in a variety of models of lawn and garden equipment, this Carriage Bolt is around 1 inch long, made of metal, gold in color, is not part of a kit or assembly, and is sold individually. The purpose of this part is to hold parts in place and is used in a variety of locations. This part can become loose through regular use and should b...Read moree regularly inspected for fatigue and wear. If the threads become stripped, it will need to be replaced. You will need a wrench or socket set and a torque wrench to complete this repair. Refer to your owner's manual to determine how tight it should be. Customers rated this repair as Easy.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with snowthrowers from MTD, Yard-Man, and Yard Machines. The metal shoulder screw fits into the top handle assembly and is used to secure the clutch handle lock assembly. This item is available as an individual replacement part.

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Ke...Read moreep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine OEM sourced replacement part that is intended to be used with snowthrowers from Ryobi, MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, and Cub Cadet. The metal flange bearing is used to provide spacing between the worm shaft and the gear housing. This item is sold as an individual replacement part.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

It is a genuine item that is supplied by the original manufacturer for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected components. It is a standard hardware which may have multiple applications. This part provides an identical replacement for a damaged or a m...Read moreissing hardware that was installed on a new unit. Check the diagrams for your specific model for the exact location and the correct application of this flat washer. Note, it is made of durable metal and is sold individually.

The grease seal fits onto the worm shaft and next to the bearing-flange and helps to stop the oil from leaking. This genuine item is supplied by the original equipment manufacturer for use with snow throwers and snowblowers made by Ryobi, MTD, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Cub Cadet. It is made of plastic and is sold ind...Read moreividually. A screwdriver, set of pliers, a socket set, and a wrench set may all be necessary during the installation of this part. It may become broken and will need to be replaced.

This is a genuine replacement part sourced from the original manufacturer for use with snowthrowers. The special plastic chute adapter is commonly used to connect the auger housing and the discharge chute. This chute adapter is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with MTD and Yard Man snowthrowers. This is a high-quality replacement for a missing or worn friction wheel rubber, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. It is a durable component which is made of durable rubber and is sold individually.