EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

71024PC (2011) MTD Snow Blower - Parts

37 - 48 of 401

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel Drain Bolt – Part Number: 710-04945
$6.55
In Stock
Fuel Drain Bolt
Part #710-04945
This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bolt may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.
Key-hi-pro – Part Number: 914-0161
$6.83
In Stock
Key-hi-pro
Part #914-0161
This authentic OEM hi-pro key, also called a woodruff key or key stock, is a metal component found in your lawn equipment that connects rotating parts. It is 3/16 inch wide and 5/8 inch long. It fits into a specially-shaped slot on a shaft and prevents the parts from moving or slipping out of position while your machine is running. To find and replace a hi-pro key on your machine, check your user guide for instructions. When removing the hi-pro key, insert a flathead screwdriver or needle-nose pliers into its groove and pry it out of its slot. Please bear in mind that this hi-pro key is sold individually.
Snow Blower Shave Plate (24 In) – Part Number: 790-00120-0637
$45.11
In Stock
Snow Blower Shave Plate (24 In)
★★★★★
★★★★★
(2)
Part #790-00120-0637
This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality shave plate is made of durable material and is sold individually. Keep in mind the hardware to secure it is sold separately.
Primer – Part Number: 951-10639B
$24.79
On Order
Primer
Part #951-10639B
Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance. The primer bulb plays a crucial role by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually. Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.
Choke Knob – Part Number: 951-11284
No Longer Available
Choke Knob
Part #951-11284
This choke knob is an authentic OEM replacement part designed for snowblowers. It is a small plastic knob, measuring 2 inches in diameter. It restricts the airflow to the engine which enriches the fuel mixture and makes it easier to start the snowblower when the engine is cold. Depending on your exact model you can find the choke knob either near the engine or on the control panel. Failure of the choke knob can occur due to wear, damage, or clogging. If the choke knob is damaged or worn down, you will have difficulties starting your snowblower, the engine may stall, and you will notice decreased performance from the snowblower. To remove the faulty choke knob, remove the clips or screws that hold it in place, and pull it off the shaft. Align the new choke knob with the shaft and secure it in place with the fasteners. Run your equipment and test the new choke knob to confirm that the choke can engage and disengage appropriately.
Washer-flat – Part Number: 736-3084
$6.73
In Stock
Washer-flat
Part #736-3084
This is a genuine replacement part manufactured for use with outdoor power equipment. The flat metal washer has many applications, usually use to fasten other parts. The washer is sold individually, please see model diagram for part location, and usage.
Spring-clutch Lock – Part Number: 732-04219C
$6.63
In Stock
Spring-clutch Lock
Part #732-04219C
It is a genuine manufacturer-supplied item that is designed for use with snowblowers. This is an identical replacement for a damaged or a missing clutch lock spring that was installed on a new unit. Keep in mind this high-quality component is made of durable metal and is sold as an individual item. A wrench set and pliers might be needed to perform this repair. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure.
Shoulder Bolt – Part Number: 710-0703
$6.55
In Stock
Shoulder Bolt
Part #710-0703
Used in a variety of models of lawn and garden equipment, this Carriage Bolt is around 1 inch long, made of metal, gold in color, is not part of a kit or assembly, and is sold individually. The purpose of this part is to hold parts in place and is used in a variety of locations. This part can become loose through regular use and should be regularly inspected for fatigue and wear. If the threads become stripped, it will need to be replaced. You will need a wrench or socket set and a torque wrench to complete this repair. Refer to your owner's manual to determine how tight it should be. Customers rated this repair as Easy.
Screw-shoulder .43 – Part Number: 738-04348
$6.40
In Stock
Screw-shoulder .43
Part #738-04348
This is an authentic replacement part that has been sourced from the original manufacturer to be used with snowthrowers from MTD, Yard-Man, and Yard Machines. The metal shoulder screw fits into the top handle assembly and is used to secure the clutch handle lock assembly. This item is available as an individual replacement part.
Screw, Hex – Part Number: 710-0896
$6.40
In Stock
Screw, Hex
Part #710-0896
This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Keep in mind this high-quality part is made of durable metal and is sold individually.
Flange Bearing.75 x 1.0 x.925 – Part Number: 741-0663
$13.61
In Stock
Flange Bearing.75 x 1.0 x.925
Part #741-0663
This is a genuine OEM sourced replacement part that is intended to be used with snowthrowers from Ryobi, MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, and Cub Cadet. The metal flange bearing is used to provide spacing between the worm shaft and the gear housing. This item is sold as an individual replacement part.
Bolt - M6 X 12 Zin – Part Number: 710-04915
$6.84
Special Order
Bolt - M6 X 12 Zin
Part #710-04915
This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may also find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.
37 - 48 of 401