7007 - Parts

Sold individually.

Sold individually.

This operating or cycling thermostat is used in dryers to monitor and direct the temperature inside the dryer. If your thermostat is shorted out and it will not allow the heat to come on, it is best to replace it. The tool needed for this repair is a 1/4 inch nut driver. The first step for this repair is to access the back panel and remov...Read moree the screws. Next, remove wires connected to the thermostat and remove the screw to pull out the thermostat. Now you can install new thermostat. For further installation instructions, refer to the diagram provided by the manufacturer. As a safety precaution, remember to unplug your appliance from the power source before starting this repair.

Sold individually.

This part moves the clothes around inside your dryer and helps to direct the flow of hot during the drying cycle.

This kit includes the heating element restring coil, 2 insulators and a terminal block.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This part acts as a safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this piece will shut down power to the heating element.

With the spring it helps keep the tension in the belt by pulling the idler pulley.

The Throttle Box Assembly, or the Throttle Assembly, is a kit that includes the housing, handle, and hardware. It is black and constructed of steel and plastic. It can be installed onto the right hand upper handle, using a screwdriver and pliers, and is rated as Medium difficulty to install. This kit contains the parts that control the ...Read moreamount of the air and fuel entering the engine. When the part breaks (likely due to fatigue) you will no longer be able to control the engine. If nothing happens when you move the handle, that means it has become disconnected. When the part is broken it must be replaced. Check your model number to ensure you are selecting the correct replacement part.