7004 - Parts

This is a genuine manufacturer-sourced component which is specially made for use with Toro snowthrowers. It is a standard hardware which may have multiple applications. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this screw. Keep in mind it is a high-quality component is ...Read moremade of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is an authentic OEM sourced replacement piston ring set which is specially produced for Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of these parts is to provide a tight seal between the piston and the cylinder walls. A worn or broken piston ring will allow combustion gases to escape the se...Read moreal and enter the crankcase, this would cause low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Please note this high-quality metal set is sold individually.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal hex nut is part of the mower\\\'s deck assembly. This nut is used to secure the blade pulley to the spindle shaft assembly. This part is sold individually.

The switch assembly goes next to the rocker switch and is made of metal. This is sold as a kit that contains the switch, the nut, and the lockwasher. These are OEM parts from Toro and Lawn Boy for use in lawn tractors. If these items become broken they will need to be replaced and may require a wrench during the installation.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers. The metal hex head screw is used with a variety of different models of snowthrowers. This screw can have different applications depending on the model of snowthrower. The screw is sold as an individual replacement part, please see model diagram for part location and usage.

This is a genuine replacement part that has been OEM sourced to ensure a high level of quality. The hose connector is intended to be used with riding lawnmowers. This item attaches to the cleanout fitting on the mower's deck assembly. This item is used to attach a garden hose when cleaning the inside of the deck. The hose connector is sold as an individual replacement part.

It is an authentic OEM part which is made for Lawn Boy and Toro riding lawn mowers and garden tractors. This is one of the special bearings that allow wheels to rotate with minimum friction. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement. One durable metal bearing-wheel is included. Make sure to...Read more check the appropriate diagrams for your model for the correct installation of the new component. You will need a wrench set to perform this repair.

This is an authentic Toro replacement part. The flat washer is commonly found in a variety of Toro yard machines such as lawn mowers and snow throwers. The flat washer is generally used to provide space and protection between a nut or bolt head and a housing. Please be aware that there are different washers used in the machine. Refer ...Read moreto the parts diagram to be sure of ordering the correct part. You may require a wrench, screwdriver, or pliers to replace this item. This part is sold individually.

The thrust washer is made of metal and goes next to the spring washer. This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Toro and Lawn Boy. This item is available as an individual replacement. During the installation process, a screwdriver might be needed to replace this part. It will need to be replaced if it breaks.