EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

66513614101 Kenmore Trash Compactor - Instructions

All Instructions for the 66513614101
61 - 75 of 122

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bought a washer without front leveling feet
1 of 3 people found this instruction helpful.
  • Rick from Lennon, MI
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
The repair was simple as you can imagine. Thought I could buy these legs at any big box store or at least at the local hardware store. No such luck. Partselect had the right product---easy to order and easy to install. Things around here are great.
Was this helpful?
Thank you for voting!
unit was missing parts
3 of 9 people found this instruction helpful.
  • Richard from glendale, AZ
  • Really Easy
  • 15 - 30 mins
Installed new parts. Worked fine.
Was this helpful?
Thank you for voting!
Plastic Gear Wheel Broke
1 of 3 people found this instruction helpful.
  • Reagan from Glenshaw, PA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Emptied all garbage! Laid machine on its side. Removed cover. Removed left over gear parts by removing pin. Loosened chain by removing two top left corner screws. Place new plastic gear in position with chain. Returned screws to top left corners. Returned pin to gears. Make sure chain is taught. Replace cover. Lift back up from i ts side. Test.
Was this helpful?
Thank you for voting!
motor gear broken
1 of 3 people found this instruction helpful.
  • Clem from Scottsdale, AZ
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
There were no instructions that came with the parts kit other than how to set the spacing for the gear lash. There were parts in the kit which I have no idea what they are (4 inch long plastic pipes?. Having 4 years experience with Sunbeam appliance repair was an asset. The old melted and broken gear came off easily with a few strikes of a hammer on a flat blade screwdriver. The replacement gear was a perfect match and the scroll pin was put in with a little gusto effort (tight fit as it should be). It would be great if just one gear or the other could be ordered....
Was this helpful?
Thank you for voting!
Compactor ram was stuck in the down position and door would not open
0 of 1 people found this instruction helpful.
  • Michael from South Boston, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
After inspecting to make sure the actuator was functional and that power to the unit was not an issue I was able to find that one the drive gears cracked in half and made the compactor inoperable. It was easy to remove the bottom casing with a nut driver. This casing covered the drive gear which operated the ram. After slightly loosening the gear mounts and I was able to replace center gear and re-attach gear chain and re-tighten. Then replace bottom casing and the compactor was back in action. Huge savings!
Was this helpful?
Thank you for voting!
Ram quit moving
0 of 1 people found this instruction helpful.
  • Hal from Granada Hills, CA
  • Easy
  • 30 - 60 mins
  • Nutdriver
Removed bottom and replaced gears
Was this helpful?
Thank you for voting!
Broken Drive Gear
1 of 4 people found this instruction helpful.
  • Michael from Painted Post, NY
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed the gear cover at the bottom of the compactor. Loosened the slack on the chain. Replaced the gear drive. Replaced the gear cover. Worked like new. No major obstacles.
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people found this instruction helpful.
  • Howard from Boynton Beach, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
Was this helpful?
Thank you for voting!
roller bearing for trash bin was damaged and would not allow canister to roll
6 of 32 people found this instruction helpful.
  • roberto from keller, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
the bearing were the perfect match and instructions helpful. sysem is rolling smoothly
Was this helpful?
Thank you for voting!
Large plastic gear cracked in half. Compactor was stuck in the compact postition
  • Mike from Campbell, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
replaced the large gear and put it back together.
Was this helpful?
Thank you for voting!
Broken drive gears
  • THOMAS from DENNISPORT, MA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
Took out old gears replaced with new very easy with your dirictions.
Was this helpful?
Thank you for voting!
plastic gear broke in half
  • Richard from WAYLAND, MI
  • A Bit Difficult
  • 30 - 60 mins
Same problem as described previously on this site. Pulled unit out and replaced the gear as described. Thanks for the info - would have been tough with out it.
Was this helpful?
Thank you for voting!
Drive motor would not turn off after completing cycle
  • William from Jacksonville, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Pull unit from under counter (Held in place with 2 screws) Use nut driver to remove top and front panel. (I didn't remove the control panel from the front panel which probably made access more difficult) Locate the directional switch near the top of the unit and remove two screws, being careful not to lose a small metal plate into which the screws thread (similar to a Tinneman nut). I moved the wires one at a time from the old switch to the new as I am color blind and have trouble with wire colors. Fit the new switch in place, being sure the switch lever is positioned against the metal tab that operates it. Screw the switch in place and then reassemble the compactor.
Was this helpful?
Thank you for voting!
Broken plastic drive gear
  • Charles from Goshen, KY
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Very simple, changed the gear, adjusted the drive and tested. Very straight forward.
Was this helpful?
Thank you for voting!
Ram stuck in down poaition
  • Candace from Ocala, FL
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Replaced drive gears.They arrived in a kit from Parts Select with instructions.They fit perfectly and the compactor works like new.
Was this helpful?
Thank you for voting!
All Instructions for the 66513614101
61 - 75 of 122