- Home
- 6651336581
- Instructions
6651336581 Kenmore Trash Compactor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
none
2 of 2 people
found this instruction helpful.
-
craig from OCALA, FL
- Very Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
As per directions
Other Parts Used:
Was this helpful?
Thank you for voting!
Compactor would not open. Ram was down
2 of 3 people
found this instruction helpful.
-
James from Flagstaff, AZ
- Easy
- 30 - 60 mins
-
Nutdriver, Wrench (Adjustable)
Once I discovered that the ram was down, I had to determine why. Opened up the bottom and discoverer the drive gear was broken. Ordered the parts kit and made the repair. Did not know what the other parts in the kit were for, but it works.
Was this helpful?
Thank you for voting!
Trash Compactor didn't work
2 of 3 people
found this instruction helpful.
-
john from salinas, CA
- Easy
- 1- 2 hours
-
Nutdriver, Socket set
The plastic power nut had stripped out on my 12 year old trash compactor. Ordered 2 new ones from Partselect and installed them. Now it works like new again.
Was this helpful?
Thank you for voting!
Trash carier wore out
2 of 3 people
found this instruction helpful.
-
Carmen M from Port Orchard, WA
- Really Easy
- Less than 15 mins
Upon the receipt of my part it just had to be slipped into place. I had the part I needed within 3 days of ordering.
My had ordered parts for various items in the past and we have always been very satisfied with the care and experteis of this company.
My had ordered parts for various items in the past and we have always been very satisfied with the care and experteis of this company.
Was this helpful?
Thank you for voting!
Rotary switch had finally worn out and was brittle and broken on our 30 plus year old trash compactor.
2 of 3 people
found this instruction helpful.
-
Ray from MUNCIE, IN
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Removed the switch knob, the outer nut, and the front plate.
Unplugged the old switch from the 3 wires and plugged them into the new switch and put it back together with the new knob. Probably less than 5 minutes.
Unplugged the old switch from the 3 wires and plugged them into the new switch and put it back together with the new knob. Probably less than 5 minutes.
Was this helpful?
Thank you for voting!
broken handle
1 person
found this instruction helpful.
-
Thomas from Greene, RI
- Really Easy
- Less than 15 mins
-
Screw drivers
It is held on with three screws. The PartSelect was the only web site that showed me a picture of the part I wanted. The other web sites said it was no longer made. It was shipped out the day I ordered it, and took a minute to install it. Will order again from your company - great service - thanks.
Was this helpful?
Thank you for voting!
Broken drawer handle
1 person
found this instruction helpful.
-
Elaine from SPRING GROVE, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed two screws on back of pull out door. Pulled up on handle, came out easily, slide the new one in, replaced the screws and done. Less than 5 minute repair.
Was this helpful?
Thank you for voting!
Rollers wore out
1 person
found this instruction helpful.
-
Charles from NEWBERRY, MI
- Very Easy
- Less than 15 mins
-
Socket set
Removed and replaced in less than 15 minutes. Works like new again
Was this helpful?
Thank you for voting!
The previous handle broken in half.
1 person
found this instruction helpful.
-
Cynthia from JEFFERSON CTY, MO
- Very Easy
- Less than 15 mins
There were two screws holding the handle on, We removed the two screws, removed the broken handle and screwed the new handle on.
Was this helpful?
Thank you for voting!
We had a newly cracked handle on a 36 year old trash compactor.
1 person
found this instruction helpful.
-
Deborah from DENNIS, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Took under 5 minutes to unscrew old handle and screw on the new one. Identical part to old handle, compactor looks and works like new!
Was this helpful?
Thank you for voting!
Lost Screws from lower access covers for my Dishwasher
1 person
found this instruction helpful.
-
Johnny from LEVITTOWN, PA
- Very Easy
- Less than 15 mins
-
Nutdriver
Reassembled lower access covers using the new screws purchased from parts direct, perfect fit replacement. Hardest part remembering how they fit Dishwasher.
Was this helpful?
Thank you for voting!
Front legs were rotted.
1 person
found this instruction helpful.
-
Cindie from DUNMORE, PA
- Really Easy
- 15 - 30 mins
-
Wrench (Adjustable), Wrench set
Replace front legs. Very easy fix.
Was this helpful?
Thank you for voting!
Broken handle
1 person
found this instruction helpful.
-
Kathrine R from OKLAHOMA CITY, OK
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed old one. Slide new one in. Screwed in two screws. Done. The handle ended up being black, even though the part was listed as brown.... that is good, because the original part was black.
So glad you had the part. It was pricey, but way less than a new trash compactor!
So glad you had the part. It was pricey, but way less than a new trash compactor!
Was this helpful?
Thank you for voting!
Compactor stop working
1 person
found this instruction helpful.
-
Jackie from Malone, NY
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
I flipped this unit over,removed 4 screws to the drive gear.I tore apart found a nut came off the screw rod.Which broke the drive gear.I looked on line found the parts select page.That showed the diagram i needed,to order parts, i needed.The wife and i tackled this task,of repairing this product.The repair was quick and easy.It took less
... Read more
than 30 minutes including cleanup.The wife happy,that all that matters.
Jack
Jack
Read less
Was this helpful?
Thank you for voting!
a plastic bag got caught around the screw and the flange on the nut broke so it couldn,t raise one side so the door was jamed at an angle
1 person
found this instruction helpful.
-
Rod from BENNINGTON, VT
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Wrench (Adjustable)
I pulled the unit out and tipped it over . I pulled the pan off the bottom then i could put a box end wrench on the screw that was jamed then tuned the screw to loosen the door . i then removed the plastic bag that was wrapped around the screw and put the new nut on and all fixed
Was this helpful?
Thank you for voting!