65R-TC Ridgid Pipe Tools - Parts

This is an authentic Ridgid replacement part. The wave washer is designed by the manufacturer for use in pipe and conduit threading machines. This is a set of four metal wave washers, which may be found in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct part. You may require a wrench or pliers when replacing this item.

This is an OEM part sourced directly from the manufacturer. The pawl spring is found in Ridgid pipe & conduit threaders. This is a set of four metal springs, used to apply tension to the pawl in the drive plate assembly.

This is a manufacturer-approved replacement part sourced from the Ridge Tool Company manufacturer. The metal, cam lever pin is compatible with the 65R-C and 65R-TC Pipe & Conduit Threaders. This part is designed to help secure the release cam lever into the drive plate. A screwdriver is needed to make the repair. This item is sold individually.

This is a genuine replacement part sourced directly from the manufacturer. The drive plate screw is found in pipe & conduit threaders from Ridgid. This is a set of four metal screws, which are placed in the drive plate. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing these parts.

This is an original Ridgid replacement part. The release cam is designed by the manufacturer for use in pipe and conduit threaders. This part is made of metal, and is placed in the drive plate to allow the threader to be removed from the pipe. You may require a wrench and screwdriver when replacing this item. This part is sold individually.