My Orders
6517 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Just watch the you tube video. It's great! I love partselect.com!!!
0 of 1 people
found this instruction helpful.
-
rob from corbin, KY
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Socket set
I love the Partsselect.com youtube videos. The man in those videos rocks!!! I did the repair of my rear drum bearing kit exactly as he showed me in his video and it was perfect. I have spread the word on facebook and around work about Partselect.com and friends and coworkers are already checking it out. Hey, everyone loves a good thing. I
... Read more
suggest that you do not be afraid, you CAN do it. Tear that baby apart and save yourself some money.
Read less
Was this helpful?
Thank you for voting!
clogged lint filter with rust
0 of 1 people
found this instruction helpful.
-
David from Burlington, VT
- A Bit Difficult
- 30 - 60 mins
The part received had about 6" of the screen not bonded to the frame. I used clear epoxy and a 1/8" dia. dowel wrapped in saran wrap. after applying the epoxy to the screen/frame interface, the wrapped dowel was clamped to the frame. After the epoxy cured I removed the fixture and peeled off the saran wrap. The fix was a complete success
... Read more
and was undetectable. Your support rep. was excellent and I will use your company anytime that I need parts. Thank you. Dave Hathaway.
Read less
Was this helpful?
Thank you for voting!
dryer was making thumping noise (like when a pair of sneaker is being dried)
0 of 1 people
found this instruction helpful.
-
Alan from Waterloo, IL
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers, Socket set
Started with removal of rear inspection plate on rear of drier,rotated drier drum by hand to look for any visible problems. Found that drive belt with age had lost sections of teeth and every time the bad sections would go past motor they would "thump".
1. Removed belt from tensioner. Done simply by moving tensioner to unload belt. ... Read more r />2. Slipped belt off motor drive and moved belt to front of drum.
3. Opened drier door and removed 4 screws from under the lid or top of drier ,raised lid for access to belt once belt had been slid to front of drum.
4. (steps 4 and 5 are the hardest parts)Worked drive belt between drum and felt insulators keep in mind there are many stamped steel pieces and sharp edges can be present.
5. Removed belt by feeding a small section past felt and drum and worked rest out from frt. top of drier.
6. Installed new belt in reverse order as removal.
This was done without aid of instruction manual and by someone having major back surgery 4 months earlier. No idea how much this saved me but the price of the belt and time and effort involved made it woth my while I'm sure.
1. Removed belt from tensioner. Done simply by moving tensioner to unload belt. ... Read more r />2. Slipped belt off motor drive and moved belt to front of drum.
3. Opened drier door and removed 4 screws from under the lid or top of drier ,raised lid for access to belt once belt had been slid to front of drum.
4. (steps 4 and 5 are the hardest parts)Worked drive belt between drum and felt insulators keep in mind there are many stamped steel pieces and sharp edges can be present.
5. Removed belt by feeding a small section past felt and drum and worked rest out from frt. top of drier.
6. Installed new belt in reverse order as removal.
This was done without aid of instruction manual and by someone having major back surgery 4 months earlier. No idea how much this saved me but the price of the belt and time and effort involved made it woth my while I'm sure.
Read less
Was this helpful?
Thank you for voting!
Belt broke, drum wouldn't turn.
0 of 1 people
found this instruction helpful.
-
James from Brunswick, GA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers, Wrench set
Pulled the top of dryer off. Separated the door from the drum seal or gasket, slipped the belt through, put the drive belt on the motor and then put it all back together.
Was this helpful?
Thank you for voting!
dryer belt broke
0 of 1 people
found this instruction helpful.
-
Carol from Wendell, NC
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers, Socket set
First I checked on-line "how to change a dryer belt" and followed the instructions. Remove front panel and slide belt over drum, in the back, put belt around pulley and hand trun the drum. on-line instructions had pictures to ensure proper install. It was easy.
Was this helpful?
Thank you for voting!
Broken drive belt
0 of 1 people
found this instruction helpful.
-
Gregory Modelle from Somers Point, NJ
- Easy
- 15 - 30 mins
-
Nutdriver
open the front of the dryer, open the back access panel, remove the old belt fragment, pull front cover away from bushing surface at the front of drum, drape new belt around the face of drum, match location visible as the track of old belt, reroute belt at the motor and install tensioner in the proper way, reattach front cover, install ba
... Read more
ck panel, done.
Read less
Was this helpful?
Thank you for voting!
The screen had holes in it and was leaking lint into exhaust pipe.
0 of 1 people
found this instruction helpful.
-
John from Palmerton, PA
- Really Easy
- Less than 15 mins
Just removed old tray and installed new tray.
I was completely surprised that in less than 24 hours the new part was at my door!
This is the kind of service every company should strive to supply to the customer,and the delivery fee was regular 3-5 day delivery.
A job well done !!!!
I was completely surprised that in less than 24 hours the new part was at my door!
This is the kind of service every company should strive to supply to the customer,and the delivery fee was regular 3-5 day delivery.
A job well done !!!!
Was this helpful?
Thank you for voting!
The old lint filter had a tear in it...decided to replace it.
0 of 1 people
found this instruction helpful.
-
Gary from Aurora, OH
- Really Easy
- Less than 15 mins
1. Open dryer door.
2. Remove old lint filter.
3. Put new filter in it's place.
2. Remove old lint filter.
3. Put new filter in it's place.
Was this helpful?
Thank you for voting!
Old lint filter was cracked/damaged
0 of 1 people
found this instruction helpful.
-
Stephen from Port Orchard, WA
- Really Easy
- Less than 15 mins
Just put it in place. The hardest part was to choose the model number closest to the one I have (since it wasn't listed). PartSelect.com showed a list of similar models and I was able to choose from that. Luckily I got the right one (wrong color, but it fit!).
Was this helpful?
Thank you for voting!
There were multiple holes in the lint filter screen.
0 of 1 people
found this instruction helpful.
-
Kenneth from Kennesaw, GA
- Really Easy
- Less than 15 mins
There were no tools required. I simply pulled out the old filter, compared it to the new filter, for size and shape. Then simply placed the new lint filter in place of the old one.
Was this helpful?
Thank you for voting!
The drive belt on the trusty GE dryer, bought used from a GI in Germany about 40 years ago and donated to our relatives when we returned to the States finally broke and I airmailed them a new one.
0 of 1 people
found this instruction helpful.
-
JACK from Fairfax, VA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
The repair was simple with my mechanic relative handling the tools. Total time about 25 minutes.
Previous repairs to the venerable machine with parts obtained freom Part Select and shipped to Germany: new drive motor and drum bearings.
Previous repairs to the venerable machine with parts obtained freom Part Select and shipped to Germany: new drive motor and drum bearings.
Was this helpful?
Thank you for voting!
Loud squeaking noise
0 of 1 people
found this instruction helpful.
-
Steven from Calera, AL
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Screw drivers
2 part repair. I replaced the front drum slide kit in about 20 minutes. It was better but still made lots of noise (was quiet for about 20 minutes then started back) so I ordered the rear drum bearing kit & a new belt. Replaced them when parts arrived. The video was great (the instructions with the parts were poor). However, my model
... Read more
had a circlip holding the bearing to the mount in the heating element & the drum did not come out until I removed the 3 torx screws in the drum & the bearing remained attached to the heating element. The new bearing kit was the one shown in the video & it all went back together easily but the belt was impossible to get on from the front. My friend helped & we removed the back access panel (had to remove the dryer cord to get the panel off). Belt was easily fitted & thus far (1/2 hour of use so far) the dryer is quiet.
Read less
Was this helpful?
Thank you for voting!
It was making a loud noise
0 of 1 people
found this instruction helpful.
-
susan from Cypress, TX
- Really Easy
- More than 2 hours
-
Nutdriver, Screw drivers, Socket set
First of all, I am a women...I read where it was probably my rear bearings so I ordered the part, it came in just right, then I replaced it put it all back together, and with the computers help, got it going, belt back on and all and then turned it on and walah it still made a loud noise. Shucks, so I read more and it said it could be the
... Read more
front bearings which I should have tried first but didn't read it first. Ordered part and put it on and wallah, that wasn't it. The noise sounded like the paper in a bicycle spoke so I checked the fan. There was the problem. The fan had so much dryer lint behind it it was forcing it against the housing making a noise. Cleaned it removed all the new unnessary parts and re-boxed them and put it back together but just before I put it together the door fell and two wires came loose so I plugged them back in and put the wrong one in the wrong place cause when I plugged the dryer in sparks went everywhere!!!! I need a man now!!! Scared of electricity!! Sure wish I knew if the noise was fixed :).
Read less
Was this helpful?
Thank you for voting!
Broken drive belt
0 of 1 people
found this instruction helpful.
-
JOSEPH from BERGENFIELD, NJ
- Difficult
- More than 2 hours
-
Screw drivers, Wrench (Adjustable)
Unplugged machine and turned off the gas. Removed top panel,4 screws along inside top edge of door opening. Used a wooden shim to pry the drum away from the surrounding "lip with felt padding. Slipped belt through.the trick is getting the belto around the entire drum. First I got it over the top of the drum, and fed it around the bottom
... Read more
by turning the drum and pushing the belt through the opening made by the shim between the bottom of drum and the lip with felt. It was kind of like feeding a bicycle chain onto a sprocket as you turn the wheel..
Removed back panel and vent hose, removed old belt laying on floor of machine, fed the belt onto the motor pulley and the tension pulley. Tension pulley presses on top side of belt. Belt should be in same position on drum as old belt, you can see a friction mark all around the drum from the old belt.
Replaced panels and vent hose. Put felt padding back into place wherever it slipped out. Very important because if you don't it scrapes the drum when turned on and makes a loud sound.
Dryer works perfectly again.
Removed back panel and vent hose, removed old belt laying on floor of machine, fed the belt onto the motor pulley and the tension pulley. Tension pulley presses on top side of belt. Belt should be in same position on drum as old belt, you can see a friction mark all around the drum from the old belt.
Replaced panels and vent hose. Put felt padding back into place wherever it slipped out. Very important because if you don't it scrapes the drum when turned on and makes a loud sound.
Dryer works perfectly again.
Read less
Was this helpful?
Thank you for voting!
Squeaky dryer
0 of 1 people
found this instruction helpful.
-
Priscilla from San Diego, CA
- Difficult
- More than 2 hours
-
Pliers, Screw drivers, Socket set
First I removed the drum as described in many other comments. Took me about 10 minutes, pretty easy. Replaced the part which was easy and could be figured out just by seeing how you took the original part off. The hard part was aligning the drum, drum washer, and metal plate back into the drum bearing. I tried over 2 hours to do this
... Read more
and because it rotates and it's almost impossible to line up all the holes, I decided to do it another way.
I took apart the drum bearing from the back panel and then outside of the dryer walls I aligned the drum, washer, metal plate and drum bearing. I screwed them all in together and then, went into the frame and reconnected it at the back w/ the horseshoe looking washer. It worked perfectly and I was frustrated that it took me so long to figure out a different way to do it.
I have to say because of the installation it was a little tough than anticipated but was very happy with the end result (no squeaking) and money savings. Definitely worth giving it a try if you're patient.
I took apart the drum bearing from the back panel and then outside of the dryer walls I aligned the drum, washer, metal plate and drum bearing. I screwed them all in together and then, went into the frame and reconnected it at the back w/ the horseshoe looking washer. It worked perfectly and I was frustrated that it took me so long to figure out a different way to do it.
I have to say because of the installation it was a little tough than anticipated but was very happy with the end result (no squeaking) and money savings. Definitely worth giving it a try if you're patient.
Read less
Was this helpful?
Thank you for voting!