6512 - Parts

Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running moto...Read morer. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Genuine Milwaukee replacement part, it is sold individually. The 06-82-8864 screw is used in various places as a fastener. Commonly used in power tools, it is compatible with the models listed below. A Torx or flat head screwdriver is needed to properly tighten this screw.

The ball joint attaches to the king pin. This authentic item is supplied directly from the original equipment manufacturer for use with lawn mowers and lawn tractors made by Snapper and Simplicity. This part is made of metal and is sold individually. A wrench might be helpful during the installation of this part. It will need to be replaced if it breaks.

This is an authentic Simplicity replacement part. The idler pulley is designed by the manufacturer for use in lawn mowers and snow throwers. This part is made of metal, and is used to adjust tension on the V-belt. You will require a wrench when replacing this part. This item is sold individually.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers from Simplicity and Snapper. The metal pulley connects to the mower deck and is used to guide the pathway the belt travels. The pulley is sold as an individual replacement part, please note the spindle pulleys are available separately.

Keep in mind this part is made of metal and is sold individually. The bearing mower shield attaches to the arbor top housing. A wrench might be needed during the installation process. This item may become broken and will need to be replaced. It is an original part for use in lawn mowers and lawn tractors made by Murray, Snapper, and Simplicity.

Capscrew,3/8-16x2.25

Harness-wiring for he

This is an authentic replacement part sourced directly from the manufacturer. The oil pressure switch is commonly found in engines and lawn tractors from Briggs & Stratton and Toro. This part is made of metal, and is placed in the sump of the cylinder assembly to sense the oil pressure and shut the machine down when the oil level is too...Read more low. You will require a wrench or pliers when replacing this part. Please keep in mind this item is sold individually.

This is a genuine OEM sourced replacement part which is specially designed for use with Milwaukee power tools. It is a standard hardware which has multiple uses based on the model of your tool, please make sure to check the appropriate diagrams for the correct location and application of this component. This screw is made of high-quality ...Read moremetal and is sold individually, you will need a flat-head or a Torx screwdriver to secure or remove it.

This is a Genuine OEM replacement part designed for Milwaukee Sawzall. It is made out of Plastic and it is Sold Individually. This part is the Insulator for the Gear Case. To replace this item you would need a Torx Screwdriver. • First you want to ensure the tool is Not plugged in • Remove the screws that secure the Gear Case • Re...Read moremove the old insulator and replace it with the new one • Reassemble using the same screws