6500PRW Magic Chef Range - Instructions

Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub

used the supplied parts...very easy. The parts were exact replacements.

first I removed the 2 screws, I then pulled the element out., accidently lost one of the wire in the insulation and had to take the back panel off which was 8 screws. Probably doubled my time. I received my part in 4 days thanks to good service and FedX It arrived the day before Thanksgiving. Just in time, Thank You All.

the new elements were super easy to replace. the old ones just pulled out and the new ones easily pushed in. the top one was a little more difficult only because it had brackets that had to be slid of and then slid onto the new one.

First I disconnect the breaker. I removed the defected receptacle and cut the wires. I connected the new receptacle with parts with the new part. Turned the breaker back on and everthing worked fine.

replaced the drip pans. Fit perfect. No problems

Called repairman, he never called back for a week. Gave up and found your website, ordered the part. You said it would take 3-5 business days. You lied, it was there the next day. Taking old element out starts with shutting off the juice. Remove trays, pans, etc. Unscrew two screws, pull out elements ends, unclip from wires, reverse the process with new one. You need a light to do this.

Broken part was already removed, so I used the screw from the broken support and installed the new support. Very simple, easy, and painless.

removed drawer from track replaced supports on track and one on the drawer.

I unplugged the stove. Took out the burner and removed receptacle by pulling it out of the bracket and clipping the wires. One thing you want to make sure is that when you clip the wires from the receptacle you're replacing you leave enough wire so that you can connect them to the wires on the new receptacle when it is in place on the stove. I had just enough but would have liked more. The bracket I received didn't match the one on the stove so I used the one on the stove since the receptacle itself was the same as the one I was replacing.

unscrewed covers . unpluged heating element , pluged in new one , put covers back on. oh yeah unplug stove first.

1 Turn off power

I am a 62 year old woman. All I had to do was unscrew the retaining screws on the back of the oven wall, pull the element out and unplug it. When the new one came, I did it in reverse. It took about five minutes. Ps: I did turn the breaker off first....

After removing the old broken element, I searched the internet for the part by brand and model number. With very little trouble, I located the correct part, ordered it and waited for the notice of shipment. In 5 days, and that included Memorial weekend we had the part and in 5 minutes the part was installed. The cost was $31.20 plus shipping..not bad!

Very easy, clip on connections and two screws to hold it in place.