64739 Kohler Engine - Parts

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This primary air filter element in your lawn equipment filters the air that enters the engine for combustion. It is a cylindrical-shaped filter made of pleated paper and is typically located within the air cleaner housing secured by an end cap. The filter element has an inner safety element that provides an extra layer of protection. It m...Read moreeasures 10 1/2 inches in length with an outer diameter of 4 1/8 inches and an inner diameter of 2 1/2 inches. To determine if the filter element needs to be replaced check for visible signs of damage or excessive dirt buildup. A damaged or clogged element restricts airflow and allows dirt and debris to enter the engine resulting in reduced performance. To replace the filter element unhook the retaining clips and detach the end caps of your air cleaner housing from the machine. Remove the old element from the housing and insert the new one. Refer to your user manual for any specific installation instructions. Please note that this OEM-sourced filter element is sold individually and separately from the safety air filter element.

Valve cover with seal and bolts.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This replacement fuel pump is a genuine OEM supplied item that is commonly utilzed on Kohler engines installed on lawn and garden equipment. It is used to pump the fuel from the tank into the carburetor. Over time it may begin to fail eventually requiring replacement, it is recommended to periodically check for hairline cracks and other d...Read moreamage to the external surfaces of the pump. Please note one durable plastic body fuel pump is included per order.

A genuine item that is supplied directly from the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. It is an identical replacement for a faulty or missing fan which was originally installed on the new unit, please refer to the appropriate diagrams of your model for the correct loc...Read moreation and application of this component. This high-quality part is made of durable black plastic and is sold individually, keep in mind the hardware to secure it is sold separately.

The slow jet o-ring attaches to the slow jet. It is an authentic OEM sourced item which is specially produced for use with Kohler engines. This item is available as an individual replacement part even though two may be needed. When replacing this part a set of pliers and a screwdriver may be needed. It is made of rubber and will need to be replaced if it becomes lost or broken.

This is an authentic replacement part manufactured for use with Kohler small engines. The valve springs are used to compress when the valve is open and extend to close the valve. The intake and exhaust valves use this spring, and it is sold individually.

Linkage Bushing