62571 Kohler Engine - Parts

Hose clamp. This clamp replaces 25 237 14-S

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The cover is used to enclose the cylinder head and to provide a fill spout to add oil to the engine. This kit will include the cover, gasket, and hardware, please note the oil cap is available separately.

This air cleaner/filter cover kit is supplied by the original manufacturer for use in lawn mowers. It includes one plastic cover, and the necessary mounting hardware - one knob, one seal and two metal brackets. The cover prevents moisture and debris from entering the air cleaner housing and damaging the air cleaner. The air cleaner cover ...Read morewill need to be replaced if it becomes cracked, damaged, or loose, to prevent contaminants from entering the engine. A faulty air cleaner cover will result in low power output, increased fuel consumption, engine stalling, and engine damage if left unaddressed. Remove the fasteners that secure the cleaner cover and pull it off the equipment. Clean the air filter housing and replace the air filter if necessary. It is recommended to inspect and replace the air filter every 3 to 6 months for optimal engine performance. Align the new cover with the mounting holes and secure it in place using the appropriate fasteners.

This is a genuine OEM sourced part used on many small engines. The Kohler reed retainer is constructed of metal, and is designed to hold the breather reed. The reed retainer is sold individually. A wrench is necessary for the proper installation.

Sourced directly from the manufacturer, this 6mm Flat Washer is made of durable dark grey metal, is not part of a kit or assembly, and is sold individually. This part should be replaced when it is damaged, worn, or can no longer spread the load under a bolt sufficiently. This Washer is found in various locations, depending on your model. Customers rate this repair as Easy.

This low-permeating fuel hose is a genuine OEM replacement designed for use on small engines. It carries fuel safely and efficiently from the tank to the carburetor while minimizing fuel vapor loss and resisting degradation from modern gasoline blends. Made from durable, fuel-resistant material, it’s intended to be cut to length during in...Read morestallation and is an ideal replacement when original fuel lines become brittle, cracked, or start leaking, helping restore safe and reliable engine operation.

This air cleaner cover is designed for small engines to protect the air filter from dirt, debris, and damage during operation. Built for a secure, precise fit, it helps maintain proper airflow and supports consistent engine performance. It’s a simple, direct replacement for restoring air filter protection when the original cover is cracked, loose, or missing.

This is an authentic OEM part for engines made by Kohler and Toro. The inner air cleaner seal attaches to the ring retainer and the fuel spitback cup. A wrench might be needed during the installation process. It will need to be replaced if it becomes broken. This part is available as an individual replacement and is made of rubber.

This is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The ignition module is designed to deliver pulses of high voltage to the spark plug, please make sure to refer to the appropriate diagrams of your model for the correct location and ap...Read moreplication of this part. Unfortunately, over time, components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually.

Throttle Cable Clamp