EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

61EA Maytag Range - Parts

1 - 12 of 16

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Flat Style Oven Igniter Kit – Part Number: 12400035
$50.56
In Stock
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(68)
Part #12400035
The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both bake and broil elements, and it can replace both short and long igniters. However, it cannot replace round style oven igniters. If your igniter glows for 90 seconds or more without igniting the burner, this means it is too weak to open the valve. The element in your igniter may have shorted it and it might not glow at all, or it might only glow orange or red. It needs to glow white hot; if it cannot get hot enough the gas will not be released from the safety valve and it will be impossible to light the burner in your oven. This kit includes the igniter, ceramic wire nuts, an insulation pad, a metal bracket, a variety of plug ends, and an instruction sheet. The body length is 3 3/4 inches, and the element inside is approximately 1 1/2 inches. This replacement part has an amperage range of 3.3 to 3.6. The element inside this igniter is extremely fragile, do not touch it. Before you start repairing your oven or range, make sure you have unplugged it and shut off the gas supply.
Double Burner Assembly – Part Number: 3412A004-19
No Longer Available
Double Burner Assembly
Part #3412A004-19
This double burner design is not to be used with sealed burner style models.
GRATE BURNER – Part Number: W11400301
No Longer Available
GRATE BURNER
★★★★★
★★★★★
(2)
Part #W11400301
This square burner grate has sides measuring approximately nine inches. It is all black in color.
Safety Valve - just over four inches long – Part Number: WP7501P133-60
No Longer Available
Safety Valve - just over four inches long
Part #WP7501P133-60
This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range. This safety valve has an amperage range of 3.3 to 3.6 amps. The valve body is just over four inches long.
Burner Cap Kit – Part Number: W10125641
No Longer Available
Burner Cap Kit
Part #W10125641
Sold individually.
Oven Thermostat Kit – Part Number: 12400034
No Longer Available
Oven Thermostat Kit
Part #12400034
This oven thermostat kit is to be used with gas oven models with a flat ignitor. Many thermostats do look similar. The knob has been updated by the manufacturer and may not look the same as the original.
Burner Spark Ignition Switch – Part Number: WP7403P190-60
$65.73
In Stock
Burner Spark Ignition Switch
Part #WP7403P190-60
Sold individually.
Hinge - Left Side – Part Number: 3418A029-34
No Longer Available
Hinge - Left Side
Part #3418A029-34
The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.
Hinge - Right Side – Part Number: 3418A030-34
No Longer Available
Hinge - Right Side
Part #3418A030-34
The hinges allow the door to swing up and down. The hinges must be properly adjusted in order for the door to close properly.
Knob Kit - Six (6) Pieces – Part Number: 12500101
No Longer Available
Knob Kit - Six (6) Pieces
Part #12500101
Contains four (4) burner knobs and one (1) each of long and short shaft thermostat knobs.
SEAL – Part Number: 7212P001-60
No Longer Available
SEAL
Part #7212P001-60
BLOCK- TER – Part Number: 7401P037-60
No Longer Available
BLOCK- TER
Part #7401P037-60
1 - 12 of 16