6176 - Parts

This replacement handle and switch kit is an authentic OEM sourced item that is specially designed for Milwaukee abrasive cut-off machines. It is the handle that provides user with a comfortable grip for operating the tool and the switch allows user to turn it on and off. Please note this kit includes the two plastic pieces of the handle,...Read more trigger switch and the hardware to secure these parts. You will need a screwdriver set to complete this repair.

This is an original Milwaukee replacement part manufactured for use with abrasive cut-off machines. The armature is the inner part of the electric motor that rotates to drive the main gear. Armatures can wear out over time and can cause the motor to shoot sparks or smoke. This armature includes the pinion gear and is sold individually, please note the bearings are available separately.

Genuine Milwaukee replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced ...Read morepower tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is an OEM Milwaukee replacement part for cutoff machines. The ball bearing is used to fit on the end of the armature and allow it to spin freely. The bearing is made of high-quality lubricated metal. The bearing is sold individually.

This is an original replacement part sourced directly from the manufacturer. The bearing is found in abrasive cut-off machines from Milwaukee. This part is made of metal, and is used to allow the armature to spin freely. You may require a screwdriver or Allen wrench when replacing this product. This item is sold as an individual replacement part.

This authentic replacement part is specially designed for use with Milwaukee abrasive cut-off machines. The bearings are used to reduce the friction between connected rotating parts, the rollers take the load distributing the weight while the minimal contact area of the ball reduces the friction. Over time the material may wear out and be...Read moregin to fail eventually requiring a replacement, please note this high-quality metal bearing is sold individually.