6142 - Parts

This is an authentic Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with small engines. The plastic air cleaner knob is used to secure the lid of the air cleaners assembly. This item may not require tools to install and is sold individually.

This is a genuine Milwaukee replacement part. It is sold as a Set of 2. It includes the brush, brush holder & brush spring. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon br...Read moreushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with small engines. The metal hex head screw is used to secure the muffler assembly to the cylinder. This screw is sold individually but four screws may be required, a hex socket wrench is needed to install this item.

This paddle trigger assembly is supplied by the original manufacturer for use in angle grinders. It allows the user to control the speed and operation of the equipment. The paddle is 5 inches long and 1.25 inches wide. It includes a switch that activates the motor and allows the grinding wheel to spin and a safety lock to prevent accident...Read moreal starting. If the grinder does not start when you press the switch, stops unexpectedly, has inconsistent speeds, and makes unusual noises when you attempt to use it, the assembly will need to be replaced. Begin by ensuring the equipment is switched off. Remove the fasteners that hold the assembly in place and detach it from the equipment. Position the new assembly on the mounting surface and secure it in place with the appropriate fastener