6141-31 (763F) Milwaukee Sander Grinder - Parts

Genuine Milwaukee replacement part Includes 1 carbon brush with wire lead attached, Sold individually • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced ...Read more power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Inner diameter 3/8" Outer Diameter 1"

Included in part number 14-30-0302

This part is provided by the original manufacturer for Milwaukee power tools. The metal bearing is used to prevent friction between moving parts, and usually goes inside a gear. The item includes one needle bearing, and please be aware any associated parts are sold separately. Please refer to your models parts diagram for any additional parts.

This is a lock lever for various models of sanders and grinders. This lever is a safety feature designed to stop and prevent the sander disc from spinning when not in use. Not only is this lever a safety feature, it also allows users to change discs without worrying about the disc spinning unintentionally. If your grinder or sander is mis...Read moresing its lock lever, it is imperative that you replace it immediately to avoid personal injury. Replacing this lever requires no tools and can be done by simply pulling the old lever out and installing the new one in its place.

This cord is an authentic Milwaukee replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. rnPower Cord Specifications: rn • 2 Prongs rn • 2 Wires rn • 18 Gauge rn • 8 Feet Long

Included in part number 49-12-0365

Included in part number 14-30-0302

Included in part number 14-30-0302