6127 - Instructions

I removed the cap from the filter pushed a lever and removed fliter. I replaced the old filter, removed the caps on the new one and slid it into channel after replacing the outer cap. I removed water from the spigot for 4 mins. and it was ready to go. I pushed the reset button to get the green light to come on.

1/4 turn of old filter. it popped out. Inserted new filter, 1/4 turn and it clicked in. Piece of cake. I'm a freakin' genius.

Unscrewed old filter and screwed in new filter.

Just put the new one in.

Built-in filter was corroded due to age. New filter corrected problem.

Hand loosened old filter and threaded in new one. Didn't even have to shut off the water. The new filter, which was delivered promptly, fit perfectly and didn't require any tools. I wish that all jobs were this easy!

I watched your online video on how to take out the old filter, and then to replace it with the new filter. It was as easy as on the video. Thanks!

I pushed the lever on the filter located at the bottom of the refrigerator and it popped out.

Just needed to replace the water filter

Filter full of water was frozen. I moved the refrigerator out, unplugged it & allowed all items to thaw. Water shot out of filter where it was broken. I ordered new filter & called a repairman to replace the thermostat. Once new thermostat installed, I placed the new filter in the refrigerator. All is working fine now.

I put the filter in the right spot and turned it to the right and it fit in.

All work was done by hand. I removed the cover plate, unscrewed the existing water filter and screwed in the new one. I returned the cover plate to its original position and bled the air out of the line by running the water dispenser for a few minutes. It could no have been easier.

Removed old filter and installed new filter.

Located the filter, removed the filter, installed the new one, reset the filter light on the front of the water discharge, and all is good.

Removed by hand the old water filter and installed the new one.