612-059 (1987) MTD Lawn Tractor - Parts

This OEM headlamp socket connects the headlamp bulb to the electrical system of your lawn equipment. If you notice cracks, loose connections, or corrosion in the socket, it may be broken. If the bulb flickers or does not turn on, the socket may be faulty. You need to replace a broken socket to maintain optimal visibility and safe operatio...Read moren of the lawn equipment. To do this, first unplug your machine or disconnect the battery. Afterward, simply disconnect the electrical wires from the socket and gently remove it from its bracket. If you plan to replace this part, consider purchasing multiple sockets and replacing them simultaneously, as they tend to wear out at a similar rate.

This manufacturer-certified Hex Bolt, measuring 5/16-18 x .75 inch, is a gold, metal, individually sold bolt. It can be installed using a wrench or socket and torque wrench, by tightening to manufacturer specifications. If damaged (likely due to fatigue) the threads will be stripped, or the ends rounded off. If broken or missing, it sho...Read moreuld be replaced. Refer to your owners manual or model number to ensure you are purchasing the correct part.

This authentic manufacturer-sourced component is specially designed for lawn tractors. It is an identical replacement for a missing or a faulty steering arm that was installed on a new equipment. Check the appropriate diagrams for your model to ensure the correct repair procedure. Keep in mind this high-quality component is made of durabl...Read moree metal and is sold individually. Note, the hardware to secure it is sold separately.

The flat washer goes between the drive shaft and the flange bearing. It is an authentic OEM sourced item which is specially produced for use with lawn tractors and tillers made by MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard Man, and Cub Cadet. This item is made of metal and is available as an individual replacement part. A wrench a...Read morend a set of pliers may be helpful when replacing this part. This washer may become broken and will need to be replaced.

This OEM spring bell washer is a small, circular piece of metal that is shaped like a cone and has an inside diameter of 1/4 of an inch. It is also called a Belleville washer or a disc spring, and it is used in lawn equipment to help spread out pressure and absorb shock between parts. If a washer is broken, it may look flattened or distor...Read moreted, and your machine may make unusual vibrations or noises. If you do not replace a damaged spring bell washer, your machine will wear out faster because there will be nothing to cushion its parts. To remove a washer, you can use pliers or a flathead screwdriver to pry it from your machine. If it is difficult to remove, you can use a penetrating oil to loosen it first. To make sure you purchase the correct number of washers, which are sold separately, check your user guide to see where they are needed in your machine.

This manufacturer-sourced replacement part is specially designed for use with Ryobi and MTD riding lawn mowers and garden tractors. It helps to distribute the pressure evenly between connected parts, it is a standard hardware which has multiple applications based on your equipment. For the correct location and application of this part ple...Read morease refer to the appropriate diagrams of your model. This flat washer is made of high-quality metal and is sold individually.

It is an authentic manufacturer-sourced component which is specially designed for use with riding lawn mowers and garden tractors. The purpose of this flange bushing is to provide a tight fit between connected parts. If the original item is damaged or is missing, this will provide an identical replacement. This part is made of high-qualit...Read morey metal and is sold individually. Check the owner\\\'s manual and the diagrams for your model to ensure the correct replacement procedure. A wrench set will be needed to perform this repair.

The ball goes next to the compression spring. This is an authentic replacement part that is sourced from the original manufacturer for use with lawn tractors and tillers made by Ryobi, Yard Machines, MTD, Bolens, Yard Man, Troy-Bilt, and Cub Cadet. It is made of metal and is sold individually. A set of pliers may be needed during the repl...Read moreacement of this part. It is a small part and will require replacing if it becomes lost.