EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

605222850A Frigidaire Dishwasher - Overview

Diagrams for 605222850A

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Tub Gasket - Gray – Part Number: 154827601
No Longer Available
Dishwasher Tub Gasket - Gray
★★★★★
★★★★★
(52)
Part #154827601
This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing water leaking out. If broken, it should be replaced. Refer to your model number and user manual to ensure this part is right for you. When making this repair, open the dishwasher door and take out the lower dish tray for better access. Pull out the old gasket, and clean the channel with a rag. Push the new gasket into place into the notch on the door, which you should see upon close inspection, using a flat-head screwdriver for assistance if necessary. We do not recommend cutting any additional length off on the tub gasket if any is present during your repair.
Heating Element Brass Nut – Part Number: 154106202
$16.03
In Stock
Heating Element Brass Nut
★★★★★
★★★★★
(9)
Part #154106202
The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.
Dishwasher Drain Hose – Part Number: 807117001
$41.86
In Stock
Dishwasher Drain Hose
★★★★★
★★★★★
(25)
Part #807117001
If your dishwasher is leaking or not draining properly, you may need to replace the drain hose. The drain hose connects to the pump located below the lower spray arm and aids in proper dishwasher drainage. This white and black plastic hose is 7.5 feet long. For this repair, you will need either a 1/4-inch or 5/16-inch nut driver, depending on your model. You will need to remove the lower access panel on your dishwasher to complete this repair; it is often easier to remove the dishwasher from the cabinet to do so. Be sure to disconnect the dishwasher from both the power and water supply before completing this repair.
Latch – Part Number: 5304525218
$37.15
In Stock
Latch
★★★★★
★★★★★
(25)
Part #5304525218
This dishwasher door latch assembly is a critical component designed to ensure safe and efficient operation. It features an integrated switch that functions as an on-off mechanism, preventing the appliance from running when the door is open. If your dishwasher fails to start or the door does not close or latch securely, replacing the latch assembly may resolve the issue. Installation requires disconnecting the power supply to avoid electrical hazards. This part is compatible with standard dishwasher models and is engineered for a secure fit and reliable performance.
Drain Pump -120V 60Hz – Part Number: A00126401
$102.02
In Stock
Drain Pump -120V 60Hz
★★★★★
★★★★★
(18)
Part #A00126401
This is a drain pump assembly for various compatible models of dishwashers, that is responsible for draining the water from the dishwasher after every cycle. This drain pump assembly is made of plastic and fits within the sump assembly, which controls the flow of water into the drain. This drain pump assembly is a genuine OEM part and is made of a high-quality plastic but is sold as an individual component without any other parts, like its drain pump check ball which works within the pump to prevent water from backwashing into the pump, as well as the drain pump cover. If you notice your dishwasher is not draining or has a lot of water buildup at the bottom of the sump assembly, this filter may be damaged, clogged or broken, and in need of a replacement. To replace this pump assembly, you will only need a Philips-head screwdriver, but should start by removing your dishwasher racks. Then, pull up on the lower spray arm, and drain trap to remove them. Next, rotate the spray arm support and pull that up to remove it, at which point you can remove the base and filter for the drain pump. With those out, you can use your Philips-head screwdriver to disconnect and remove the cover and drain pump assembly. With the pump removed, you can inspect it or install the new drain pump assembly, with the same hardware as before. Then it is as simple as reassembling the rest of your dishwasher, ensuring each connection point is fastened tightly.
Lower Spray Arm Support – Part Number: 807145201
$30.84
In Stock
Lower Spray Arm Support
★★★★★
★★★★★
(12)
Part #807145201
This plastic cover and stem assembly helps hold the lower spray arm in place.
Friction Pulley Cable – Part Number: 154756401
$8.95
In Stock
Heating Element – Part Number: 154825001
$77.69
In Stock
Heating Element
★★★★★
★★★★★
(9)
Part #154825001
This dishwasher heating element is a genuine replacement component designed to maintain optimal water temperature during the wash cycle and assist in drying dishes at the end of the cycle. Positioned at the bottom of the dishwasher tub, it ensures efficient cleaning and drying performance. Compatible with a wide range of models from Frigidaire, Kenmore, Crosley, Electrolux, and other related brands, this element replaces older versions and restores proper function when symptoms such as poor cleaning, inadequate drying, or water leaks occur. Installation requires disconnecting power to the appliance to ensure safety. Sold individually.
Door Spring – Part Number: 154579101
$52.64
In Stock
Door Spring
★★★★★
★★★★★
(11)
Part #154579101
Sold individually.
Delivery Tube Gasket – Part Number: 154406401
$20.85
In Stock
Dishwasher Water Inlet Tubing – Part Number: 5304523457
$23.01
In Stock
Dishwasher Water Inlet Tubing
★★★★★
★★★★★
(3)
Part #5304523457
The tubing carries water from the water inlet valve to the tub.
Kickplate Grille - Black – Part Number: 154745503
$29.59
In Stock
Kickplate Grille - Black
★★★★★
★★★★★
(3)
Part #154745503
This kickplate grille is attached to the bottom of the dishwasher.

Common Symptoms of the 605222850A

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
dishwasher was leaking water
177 of 213 people found this instruction helpful.
  • Charles from Milton, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
Was this helpful?
Thank you for voting!
Water leaking under the dishwasher
78 of 89 people found this instruction helpful.
  • Dennis from Tryon, NC
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwa sher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.
Was this helpful?
Thank you for voting!
Drain hose was missing
41 of 47 people found this instruction helpful.
  • John from Carthage, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
My friend bought a used dishwasher at a garage sale, the previous owner had thrown away the drain hose because it was "nasty" they said....remember it could have been cleaned. When I went to install it, I removed the old washer, and discovered that the old hose would not fit on the replacement dishwasher. I went to the local repair shop, armed with the model and serial #'s. they searched and searched their books and could not find the hose part number. they said "good luck" when I left...I went home and looked up the model on your web site, ordered the hose, and in 3 days had the dishwasher installed and running in about 30 minutes...thanks for prompt shipping.. I couldn't believe it arrived so soon...Mowerman
Was this helpful?
Thank you for voting!