6051 - Instructions

Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.

First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear ... Read more which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!

The diagnosis is about an hour. Coz, I need to open the control panel, got a tester, and trsted all critical parts inside the panel.
Also, replaced the fuse just to make sure its a new one. Found out it was a switch (bottom part) that control the open/close of the microwave door.

When found out the problem, the rest of t ... Read more he work is easy.

I Put The New Tray In the Microwave

My grandfather who is well versed as an electrician checked my microwave out because it wasn't worked. He used a multimeter to check electric current to parts in the microwave. He said a specific thermostat was not getting any current going through. I ordered that replacement part from this site and when it came in it didn't have curre ... Read more nt running through it either. He said he thought the part that was given to me was faulty. I called this companies number to ask some questions but the machine said they aren't taking any inquiry calls because of the pandemic right now. So I currently don't know what the problem is with my microwave. I want to return the part but unfortunately during Christmas time the packaging got thrown away. So as of right now I'm out the part money and probably money to buy a new appliance.

The new thermostats also did not have continuity between it's terminals.. so I ordered a second one.. it also did not pass for continuity.. before returning both I installed one and it worked.. so am not sure why continuity is the recommended test to find the original problem..

You have to be very careful because the wave guide cover is very brittle. It needs to be bent very gently in order to fit the four ends into each slot. I would highly recommend buying two just in case the first one breaks.

I thought the cover was suppose to come off from the inside of microwave. It is brand new and got bent. So I ordered a new one in case it was not working with a bend in it.

Replaced the diode next to the capacitor. If you replace a capacitor, replace the diode while your in there so you don't have to disassemble and reassemble twice.

Tried to find a video specific to his model, but did not. I did the repair without removing the microwave door. Unplugged the microwave. Used a putty knife to pop out the 1st level internal plastic cover. Removed the 4 screws on the 2nd level plastic cover. Used a couple of flat-head screw drivers to pop the 2nd level cover away from ... Read more the clips holding it on until I had room to slide the old latch off. Slipped on the new latch. Popped on the 2nd level cover and 4 screws. Popped on the 1st level cover. Plugged in the microwave, worked perfect.

Just take your time and be careful not to break any of the plastic clips on the 2nd level cover. I didn't break any, but if you're to rough could see someone breaking them.

Unfortunately for us, it wasn't the diode that needed to be replaced. The instructions that were given on how to discharge the capacitor before working on the diode, magnatron or capacitor itself, was very helpful. You don't need to be and electrician if you can follow directions. Ours ended up being the magnatron. It took about 15 mi ... Read more nutes to swirch out. I had to buy yhe part thru another site, because it was $40. 00 Dollars cheaper and the part was here in one day. Thanks for the information on the repair.