6002D Makita Cordless Drill - Parts

This replacement switch is an authentic manufacturer approved item that is designed for Makita drills. This switch plays an important role by handling the on/off function of a tool. Over time, these plastic mechanical switches will wear out requiring replacement. Please note, this includes one (1) trigger switch with lead wires attached. ...Read more To replace this switch you should only need a screwdriver. • Remove screws that hold two pieces of housing together • Carefully separate the housing pieces • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble and test the drill

This is an OEM part sourced directly from the manufacturer. The stop ring is commonly found in Makita drills, sanders, and planers. This part is made of metal, and is generally used to secure components on a shaft. It may be found in various locations in the machine, depending on model. Please refer to the parts diagram to be sure of ...Read moreordering the correct part. You will require pliers when replacing this item. The stop ring is available as an individual replacement part. Included in Part Number 183564-0

This is a genuine OEM sourced component which is specially designed for use with Makita power tools. It is an identical replacement for a missing or a faulty 7.2V-18V charger that was included with a new unit, please make sure to check the owners manual for the correct location and application of this part. Please note that a weak or defe...Read morective battery can damage the charger. Weak batteries are batteries with bad cells that will not hold a charge and keep charging eventually causing the charger to overheat and potentially smoke. Keep in mind this high-quality plastic body charger is sold individually.

This is an authentic manufacturer-sourced replacement chuck key which is specially designed for use with Makita cordless drills. The key allows a user to tighten and loosen the jaws of the chuck which holds the drill bit. This item is made of high-quality metal and it is sold individually.

This is a genuine Makita replacement part. The pan head screw is designed by the manufacturer for use in drills and hammer drills. This part is made of metal, and is generally used to secure the drill chuck. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the corre...Read morect part. You will require a screwdriver when replacing this item. This part is sold individually.