My Orders
560S - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace worn PLASTIC discharge chute linkage gears
7 of 8 people
found this instruction helpful.
-
James from PLAISTOW, NH
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Socket set
start with chute auger and punch out roll pins and cotter pin, reassemble linkage with METAL universal gears
Was this helpful?
Thank you for voting!
Dishwasher control panel cracked when opening the dishwasher door
2 of 4 people
found this instruction helpful.
-
Freeland from KENNEBUNKPORT, ME
- Really Easy
- 15 - 30 mins
First I watched the Parts Select video (Dishwasher Control Panel (Part #00475255 - How to replace) on YouTube just to be sure I could do the replacement. I ordered the part (delivered next day) and replaced the control panel in less than 30 minutes while watching the video. One note, you should be prepared to have a small stool or box t
... Read more
o set the electrical components on while swapping the buttons on the control panel. I did not want to leave them hanging by the wires and this is not shown on the video.
Read less
Was this helpful?
Thank you for voting!
Front drive wheel locked up, causing the mower to not be able to be pushed.
4 of 12 people
found this instruction helpful.
-
Walter from EVERETT, WA
- Easy
- Less than 15 mins
-
Socket set
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Was this helpful?
Thank you for voting!
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
3 of 19 people
found this instruction helpful.
-
Joel from ROSEVILLE, MN
- Very Easy
- Less than 15 mins
-
Socket set
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Was this helpful?
Thank you for voting!