5608 Toro Lawn Tractor - Parts

This spark plug terminal is supplied directly from the original equipment manufacturer. The metal terminal is designed to fasten the spark plug to the engine lead wire. This component is sold individually, and needle nose pliers are helpful with the repair. Please refer to the appropriate diagrams of your engine model for the proper application of this hardware.

This is a genuine replacement part that is OEM sourced to be used with small engines from Briggs & Stratton and Toro. The metal screw is used to fasten the diaphragm cover to the body of the carburetor. A screwdriver is needed to install the screw and this item is sold as an individual replacement part.

This authentic OEM item is made for use with Toro snowthrowers. It is one of the special nut-lock which is utilized to secure the auger assembly. This is an identical replacement for a faulty or a missing hardware that was installed on a new equipment. To ensure the exact location and the correct application of this part check the diagram...Read mores for your specific model. One durable metal nut-lock is included. A wrench will be needed to secure or remove it.

This authentic manufacturer-supplied washer is specially designed for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a damaged packing-needle valve that...Read more was installed on a new unit. One durable rubber part is included. Refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

The metal screw attaches to the muff guard bracket. It is a genuine replacement part sourced from the original manufacturer for use with blowers, engines, generators, pressure washers, snowblowers, and vacuums made by Briggs & Stratton, Toro, and Lawn Boy. This item is available as an individual replacement part. When replacing this screw a wrench will be needed. It will need to be replaced if it strips or breaks.

It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will need to be replaced. This part is an OEM from Toro and Lawn Boy for use in snowthrowers, tillers, blower-vacuums, and lawn tractors.

This needle valve kit is an OEM direct from Briggs & Stratton. The kit is compatible with many lawn and garden engines. This item is composed of high-quality metal and plastic components. Fastened to the engine carburetor, the kit carefully controls the fuel flow to the motor. A screwdriver and a wrench set is often required for the proper repair. The needle valve kit is sold individually.

This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this durable metal washer is sold individually.

A genuine item which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a high-quality replacement for a missing or damaged cover for the ratchet clutch, please make sure to check the appropriate diagrams of your model for the correc...Read moret location and application of this hardware. Keep in mind this durable part is made of metal and is sold individually.

This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The special retainer is commonly used as spacing between the head of the valve and the valve spring. The retainer is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine Briggs and Stratton part for use with Engine, Lawn Mowers, Snow Blowers, Leaf Blowers / Vacuums, Tillers, Generators, Lawn Tractors, and Chipper Shredders. The recoil starter ratchet clutch attaches to the starter reel and provides tension against the ratchet when starter rope is being pulled. The most common reason for ...Read morereplacing the recoil starter ratchet clutch is if broken or damaged. This part is sold individually.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.