53687030 Craftsman Edger - Parts

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine Murray replacement part that has been sourced from the original manufacturer to be used with walk-behind edgers. The belt links the motor's drive shaft and the blade's quill assembly. This item allows the blade and the drive shaft to rotate in unison. This belt is priced as a single item.

This replacement item is supplied by the original manufacturer for use with Craftsman lawn and garden equipment. It is an identical replacement for a missing or a faulty locknut that was installed on a new unit. This is a standard hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your mode...Read morel for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold in a pack of eight.

This is sold as a set that contains eight washers. These parts attach to the tank and are made out of metal. They are genuine items that are supplied by the original equipment manufacturer for use with Craftsman air compressors. During replacement, it may require a wrench to help install these parts correctly. They will require replacing if they become bent or broken.

This is an original Craftsman replacement part. The screw is designed by the manufacturer for use in power tools such as air compressors, band saws, and jointer-planers. This item includes two set screws, which may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in ...Read morethe machine. Refer to the parts diagram to be sure of ordering the correct part. You may require an Allen wrench or screwdriver when replacing these parts.

This is an authentic OEM replacement part that is sourced directly from Craftsman and is used in an edger/trimmer. The purpose of this part is to cut grass and is perfect for cutting, edging and trimming around sidewalks and driveways. This part is made of a durable high-quality metal and should be replaced if the edges become dull and do not cut. When ordered this part comes in a pack of three.

Ring retex .46x.04 t