535R Husqvarna Brush Cutter - Parts

This is a genuine replacement part sourced directly from the manufacturer. The nut is commonly found in yard tools from Husqvarna, such as trimmers, edgers, and brushcutters. This part is a square metal nut, which is generally used to help secure the handle assembly. Please be aware that there are different nuts used in the machine. R...Read moreefer to the parts diagram to be sure of ordering the correct part. You may require a wrench when replacing this item. The nut is sold as an individual replacement part.

This is an authentic Husqvarna replacement part manufactured for use with handheld outdoor power equipment. The carburetor diaphragm acts as a membrane that actuates the inlet needle valve to meter the amount of fuel let into the carburetor. Over time the soft rubber parts of the carburetor can seize up restricting the fuel flowing throug...Read moreh the carburetor. This diaphragm is available as an individual replacement part. It is recommended to inspect the carburetor\'s fuel pump and to clean the carburetor thoroughly when replacing the diaphragm.

This authentic replacement part is designed for use with Husqvarna lawn and garden equipment. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pres...Read moresure, heat, vibration and friction, because of this, many bearings need to be periodically replaced. Please note this high-quality component is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

This is an authentic manufacturer-approved replacement o-ring which is specially designed for use with Husqvarna handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please make sure to refer to appropriate diagrams for the correct location and use of this part. It is made ...Read moreof high-quality rubber and it is sold individually, over time the material may become brittle and crack eventually requiring a replacement.

This is a genuine component that has been sourced from the original manufacturer for use with Husqvarna handheld trimmers. The plastic throttle lockout lever fits into the rear handle and is linked with the throttle trigger. This item is used to allow the trigger to be pulled. The throttle lockout needs to be pressed down so that the thro...Read morettle trigger can be pulled. It is made of durable plastic and is sold individually. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. A screwdriver will be needed to take apart and reassemble the housing.

This screw is an authentic high quality item that is specially produced for use on Husqvarna power equipment. It is a standard hardware which has multiple uses depending on the unit, please refer to appropriate diagrams for correct location and use of this screw. Note that one hex socket head screw is included per order, you will need a hex key also known as an allen wrench to secure or remove this item.

This is a genuine replacement part that has been OEM sourced to be used with brush cutters from Husqvarna and Jonsered. The plastic tube is part of the fuel system and is used to return gas to the tank from the primer bulb assembly. This item is available as an individual replacement part.