535L Husqvarna - Parts

This replacement screw is supplied directly from the original equipment manufacturer, it is specially designed for use with Husqvarna handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, over time it may wear out or simply get lost eventually requiring a replacement. This durable metal hex socket head screw which is sold individually.

This is a genuine Husqvarna part for use with Hedge Trimmers, Brush Cutters, Trimmers, Pole Saws, and Edgers. The Engine flywheel 537249602 attaches to the crankshaft behind the recoil starter assembly. The recoil starter engages the flywheel to spin and start the engine. The most common reason for replacing the flywheel is if the engine ...Read morewon't turn. This part is sold individually. The tools that you will need to replace the flywheel is a T25 Torx bit, spark plug wrench, clutch tool, rope, T20 Torx bit and two flat-head screwdrivers.

This threaded plug bolt is a precision-designed component used to securely seal lubrication ports in gear housing assemblies on outdoor power equipment. Engineered with durable, corrosion-resistant material, it helps retain essential grease while preventing dirt, moisture, and debris from entering sensitive internal components. Its thread...Read moreed design ensures a tight, vibration-resistant fit, supporting long-lasting performance and proper gear protection. Ideal for maintenance or repair, it helps preserve smooth operation and extend the life of gear-driven systems.

This is a genuine manufacturer-sourced component which is specially made for use with Husqvarna handheld blowers and trimmers. The strap utilizes a metal lobster clasp to connect to the tool and a plastic slide adjuster with a tab. It includes one high-quality strap and one durable plastic caution sign. Note that this is not a padded shou...Read morelder strap included in the harness. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality shoulder strap with a sign is sold individually.

This is an authentic replacement part manufactured for use with lawn and garden power equipment. Fuel left in carburetors can clog passageways preventing fuel from entering the engine. Clogged carburetors can cause abnormal idling, can shut off the engine after running, or can prevent the engine from starting. The carburetor can be cleane...Read mored if it is clogged and these gaskets will need to be replaced when servicing the carburetor. The gaskets are sold as a set and the sets are sold individually.

This is a genuine replacement part sourced directly from the manufacturer. The nut is commonly found in yard tools from Husqvarna, such as trimmers, edgers, and brushcutters. This part is a square metal nut, which is generally used to help secure the handle assembly. Please be aware that there are different nuts used in the machine. R...Read moreefer to the parts diagram to be sure of ordering the correct part. You may require a wrench when replacing this item. The nut is sold as an individual replacement part.

This genuine OEM part is specially designed for Husqvarna handheld trimmers. It is an identical replacement for a damaged or a missing clamp guard that was installed on a new unit. To ensure the correct repair procedure, check the owner\\\'s manual and the diagrams for your model. Note, this high-quality clamp guard is made of durable mat...Read moreerials and is sold as an individual item. Replacing it is a simple task that should only require a screwdriver.

This is an authentic Husqvarna replacement part manufactured for use with handheld outdoor power equipment. The carburetor diaphragm acts as a membrane that actuates the inlet needle valve to meter the amount of fuel let into the carburetor. Over time the soft rubber parts of the carburetor can seize up restricting the fuel flowing throug...Read moreh the carburetor. This diaphragm is available as an individual replacement part. It is recommended to inspect the carburetor\'s fuel pump and to clean the carburetor thoroughly when replacing the diaphragm.

This authentic replacement part is designed for use with Husqvarna lawn and garden equipment. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pres...Read moresure, heat, vibration and friction, because of this, many bearings need to be periodically replaced. Please note this high-quality component is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

The drive tube assembly is a genuine replacement part designed to deliver smooth and reliable power transfer in a variety of outdoor power equipment, including trimmers, brush cutters, and chainsaws. Pre-assembled for convenience, this component is engineered to transmit motion from the engine to the cutting head, ensuring consistent performance during operation.

This is an authentic manufacturer-approved replacement o-ring which is specially designed for use with Husqvarna handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on your model, please make sure to refer to appropriate diagrams for the correct location and use of this part. It is made ...Read moreof high-quality rubber and it is sold individually, over time the material may become brittle and crack eventually requiring a replacement.