50321 Dynabrade Sander Polisher - Parts

Consists of 1 O-ring - This is not a kit

This authentic replacement part is designed for use with Dynabrade power tools. Ball bearings are used to reduce friction between rotating parts. It is one of the bearings for the rotor. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Over time bearings may be...Read moregin to wear out compromising tools functionality and eventually requiring a replacement. This part is made from durable metal and it is sold individually.

This item is a genuine OEM replacement part that is meant to be used with disc sanders and die grinders from Dynabrade. The metal flange is used to secure the sanding/grinding disc to the spindle or rotor assembly. A spanner wrench is needed to install this item. The flange is the only item included.

This is a genuine manufacturer-approved component which is designed for Dynabrade sanders and grinders. It is an identical replacement for a missing or a damaged pin that was installed on a new unit. This is one of the pins for the rear end plate. Refer to the owner's manual and the parts diagram for your model to ensure the correct repla...Read morecement procedure. Note, this high-quality pin is made of a durable metal and is sold as an individual item. A screwdriver and pliers will be needed to perform this repair.

This is an authentic Dynabrade replacement part, sourced from the original manufacturer for use with drills, sanders, and polishers. The special handle connects to the tool's housing to provide a stable grip to better control the tool. This handle is available as an individual replacement part, please see illustrated diagram for associative parts.

This is an authentic component which is sourced directly from the original equipment manufacturer for use with Dynabrade equipment. This part is made of layered fabric and laminate and is used to spin the rotor. This part is designed to slowly wear down over time, to avoid damage to the cylinder. It is advisable to replace all the rotors ...Read moreat the same time for even wear. Keep in mind these high-quality blades are sold in a pack of four. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of these parts.

The muffler cap attaches to two muffler inserts and the cone muffler. This part is available as an individual replacement part and is an OEM from Dynabrade for use in sanders. It is made out of plastic and will need to be replaced if it breaks. During the replacement process, a screwdriver may be needed to help install the cap.