5002 - Parts

It is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal for the PTO side of the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement...Read more. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair. Keep in mind, one durable rubber part is included.

This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.

This authentic part has been sourced from the original manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The metal float bowl fits onto the bottom of the carburetor and is used to house the float and store and drain the fuel that actuates the needle valve. It provides a high-quality rep...Read morelacement for a damaged or a missing component that was installed on a new unit. Keep in mind this high-quality item includes one durable metal bowl-float, the screw, the washer, and the o-ring. Refer to the diagrams of your model for the correct installation.

This part is an OEM from Briggs & Stratton. The push rod guide is compatible with many lawn tractor engines. The metal and plastic item is fitted in the cylinder head assembly, securing the push rods. The push rod guide is sold individually. A socket and wrench set are helpful in making the installation.

This item is an OEM sourced replacement part that is intended to be used with small engines for snowthrowers and riding lawnmowers. The seal is used as a replacement of an original part from Briggs & Stratton or Toro machines. This item is used to prevent oil or fuel leaks between two different part assemblies. The item can have different...Read more applications depending on the model of the engine or machine. This seal is sold individually.

This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment. Manufactured to exact factory specifications, it provides proper thread engagement and clamping force to help prevent loosening, reduce vi...Read morebration, and maintain long-term engine reliability under operating stress. Built with durable, corrosion-resistant materials for extended service life, it is an ideal replacement when original screws are missing, stripped, or worn, helping ensure safe assembly, consistent performance, and proper engine operation.

This replacement gasket-cylinder head is sourced from original equipment manufacturer. It is specially designed for use on Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Its purpose is to provide an air tight seal for the cylinder head. Over time this gasket will get compressed and deteriorate requiring ...Read morereplacement. This item is made from durable composite material and it is sold individually. To complete this repair you will need a set of wrenches.

This rocker arm adjuster, or valve lash adjuster, is a genuine OEM replacement part used in lawn tractors. It is approximately one inch long and made of steel. It is responsible for adjusting the clearance between the rocker arm and valve stem, which allows the valves to open and close as needed. The adjuster will need to be replaced if t...Read morehe threads are stripped, or if it is cracked, or worn down. Remove the spark plug wire to prevent accidental starting and remove the valve cover from the engine to access the rocker arm. Detach the rocker arm and unthread the faulty adjuster. Screw the new adjuster into the rocker arm and use a feeler gauge to set the correct intake clearance. Reinstall the arm into the engine and return the valve cover to complete the repair.

This is a genuine OEM part. The Briggs & Stratton valve seal is used on many lawn tractor machines. The metal part stops oil from moving into the cylinder from the valve stem. This item is often fastened to the intake valve and the valve keeper. A screwdriver, socket set and wrench set are required for the installation. The metal valve seal is sold individually.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

The governor spring is made out of metal and helps to control the speed of the engine. This authentic item is supplied directly from the original equipment manufacturer for use with Briggs & Stratton generators and Toro snowthrowers, tillers, and blower-vacuums. If it becomes lost or broken it will need to be replaced. A nutdriver may be necessary to help replace this part which is sold individually.