5000S - Parts

This item has been OEM sourced to ensure a high-level of quality. The metal bail spring is intended to be used with spinning reels from Shakespear and Pflueger. The bail spring fits within the rotor cover and is used to return the trip plunger to snap the bail wire back over the rotor. This item is available as an individual replacement part.

This bail arm guide is sourced from the original manufacturer for spinning reels. It is a small plastic piece located near the bail arm. The bail arm guide ensures that the line is accurately placed onto the spool during retrieval. It helps to keep the line from getting tangled or getting caught between the spool and the body of the reel...Read more. The bail arm guide should be replaced if it is damaged or worn down, as a faulty bail arm guide will cause the line to tangle or break during use. You will need to remove the rotor cover to access the bail arm guide. Locate and remove the screws that secure the arm guide in place. Gently pull off the faulty bail arm guide and place the new bail arm guide in the same position. Secure the new part using the appropriate fasteners and ensure that it is aligned correctly.

Genuine Abu Garcia replacement part, this item is sold individually. The spring washers are installed on the drive shaft of the reel It purpose is to keep all the other parts on the drive shaft in line and in their correct positions.

This is a genuine OEM sourced replacement part used on Ambassadeur fishing reels. The spool centering shim 4-7000 is constructed of a metal composite. This part is fitted between the spool cap 6001C and the left spool cap 7000 mod. The shim helps to accurately wind the fishing line. Two are often needed for the replacement. Please keep in...Read more mind, this part is sold individually. A screwdriver may be helpful in making the repair.

This is a genuine item that is supplied by the original equipment manufacturer. It is a specially designed component for Abu Garcia fishing reels. The cog wheel is an important part of the mechanism that controls the spool. If it is damaged or is missing, this will provide an identical replacement for the part that was installed on a new ...Read moreunit. Check the diagram for your model to ensure the correct installation of the new part. You will need a screwdriver and pliers to perform this repair.

This is a genuine OEM part. The Abu Garcia spool pinion is constructed of plastic, and is sold individually. This item is compatible with Ambassadeur fishing reels. The spool pinion is fitted next to the ball bearing in the spool assembly, securing the axle. A screwdriver and a pair of pliers are needed for the repair.

This is an authentic replacement part sourced directly from the manufacturer. The spool bushing is commonly found in Abu Garcia fishing reels. This part is made of metal, and is used to allow the spool to move easily with the ball bearing. You may require a screwdriver when replacing this item. It is advisable when removing multiple p...Read morearts to keep careful track of their order so they can be reassembled correctly. The spool bushing is available as an individual replacement part.

This is a genuine OEM sourced replacement part designed for use with Abu Garcia reels. The purpose of an axle clip is to secure the axle of the reel. If this part does not work properly, it will be difficult to achieve proper tension, resulting in poor casting distance and tangled line. It is made out of black plastic and it is sold individually.

This is a genuine manufacturer-sourced replacement part which is specially designed for Abu Garcia fishing reels. The purpose of this spring is to apply tension on the click pawl. If the hardware is worn or damaged, this will provide an identical replacement for the original component that was installed on a new unit. Refer to the appropr...Read moreiate diagrams for your model to ensure the exact location and the correct repair procedure. A screwdriver might be needed to remove and resecure the hardware when replacing this spring.

This high-quality spool control knob is supplied by the original manufacturer for use with Abu Garcia fishing reels. The purpose of this knob is to provide a user with a comfortable grip for controlling the tension on the spool. Check the owners manual and the diagram of your model for the exact location and the correct installation of th...Read moreis part. Keep in mind this high-quality spool control knob is made of a durable plastic and is sold individually. No tools would be needed to replace it, simply pull off the old knob, and secure the new one.

This is a genuine Abu Garcia replacement part for ambassadeur reels. This metal anti-reverse dog sits on the brake pate, inside the right hand plate, and engages the anti-reverse function when a fish lands. This anti-reverse dog is sold individually, please see model diagram for additional parts.