All Installation Instructions for Hoover Range 4870

Grease filter broke

Lifted the old one out and put the new one in. Very easy

Parts Used:

Grease Filter

Charles from Leighton, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Wanted to replace old grease filter

Removed old filter, dropped in new filter. A breeze! What was best of all, is that Parts Select shipped the filter immediately and it arrived within just a day or so! Well done!

Parts Used:

Grease Filter

Christine from Pembroke, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Filter was old and discolored.

The new replacement grease filter came without damage and it was a simple task of removing the old and setting the new in it's place. No tools were required.

Parts Used:

Grease Filter

Robert from Warroad, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Switch post broke. Could no longer turn that burner on.

Replacing the switch was quick and easy. It actually took only about two minutes.

Parts Used:

Surface Unit Infinite Switch Kit

Joe from Cottage Grove, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

old grill burnt out

took new element out of box, inserted it into stovetop, everything was over in about 2 minutes. It worked just fine.

Parts Used:

Grill Element

Kay from Fontanelle, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

stem on burner controls broken

follow the EASY to read and understand instructions.replaced all 4 controls in about 35 min.

Parts Used:

Surface Burner Knob

Surface Unit Infinite Switch Kit

Kenneth from Greenwood, IN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

Surface burner did not heat

I ordered part one day, recieved part the next day. I installed it the next day. It worked perfect. THANK YOU!

Parts Used:

Surface Unit Infinite Switch Kit

james from Santa Claus, IN
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

Both burners would come on when you turn on the back larg back burner.

Replaced surface unit infinite switch

Parts Used:

Indicator Light Kit

Surface Unit Infinite Switch Kit

Jerry from Tallahassee, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

grill would not get hot enough

I have a newer jenn air with the 3 prong elements. The original element was 3 prong 1900W only using one of the controls. Since the stove socket would accommodate 4 prongs I looked up the part for the older stoves (PS2357533)which had 2 elemants using both controls. The element plugged right in and I now have high heat like on my older models and it now grills like it should instead of just heating the stuff up. Highly recommended. One caution you will need a metal piece to support the element since the newer stoves do not use the metal bricketts with supports.

Parts Used:

Grill Element

Paul from Berlin, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Could not read numbers on the knobs

Simply pull off the old ones and replace with the new ones. Problem was finding the correct knobs with the double "s" shaft fitting.The item number indicated by the model number was incorrect. I saw a kit with four knobs on your web site and ordered the kit and not the recommended item. Turned out to be the right move and the knobs fir just fine.

Parts Used:

Surface Burner Knob