4829A Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
drawer wouldn't fit flush
0 of 1 people
found this instruction helpful.
-
Gary from Milford, DE
- Really Easy
- Less than 15 mins
-
Pliers
removed drawer - removed broken drawer glides. new glides clip in very easy
Other Parts Used:
Was this helpful?
Thank you for voting!
Missing drawer glide
0 of 1 people
found this instruction helpful.
-
Birt from Brookfield, OH
- Really Easy
- Less than 15 mins
I attached the drawer glide clips to the stove and inserted the drawer, done in minutes. The video on your site actually made it very easy made it so there was no guessing.
Was this helpful?
Thank you for voting!
Replacing broken parts
0 of 1 people
found this instruction helpful.
-
Barry from Sarasota, FL
- Really Easy
- Less than 15 mins
Wow! That was simple! I did not even have to run all over town looking for the parts. I just hopped on the web, checked out the online diagrams, ordered and the parts showed up in the mail within a few days. It could not have been easier. Parts Select is now in my bookmarks for future use.!
Thanks guys
Thanks guys
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken drawer guide
0 of 1 people
found this instruction helpful.
-
wade from cadillac, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Popped out the old ones with a screw driver. Pushed in the new ones. Whole process took less than three minutes, super easy.
Was this helpful?
Thank you for voting!
all my drawer glides were broken
0 of 1 people
found this instruction helpful.
-
Susan from Clinton, UT
- Really Easy
- Less than 15 mins
So easy! The drawer glides just popped right in!
Other Parts Used:
Was this helpful?
Thank you for voting!
broken glide
0 of 1 people
found this instruction helpful.
-
robert from kettering, OH
- Really Easy
- Less than 15 mins
snapped new glide in place.
Was this helpful?
Thank you for voting!
The sliding drawer at the bottom of my stove would not stay in position.
0 of 1 people
found this instruction helpful.
-
Terri from Findlay, OH
- Really Easy
- Less than 15 mins
I pul;led out the drawer and inserted the front glide in about 2 seconds and slid the drawer back in! Presto--fixed!
Was this helpful?
Thank you for voting!
Drawer glide broken on electric range
0 of 1 people
found this instruction helpful.
-
William from Broadview Heights, OH
- Really Easy
- Less than 15 mins
Found correct parts on Partselect.com, watched the instructional video, ordered the parts and installed them when they arrived. Very simple, very easy.
Other Parts Used:
Was this helpful?
Thank you for voting!
the plastic glide had broken
0 of 1 people
found this instruction helpful.
-
lisa from flushing, NY
- Really Easy
- Less than 15 mins
the repair was simple and it was so easy to order thanks to your website my stove is as good as new.
Was this helpful?
Thank you for voting!
Drawer guide broken (for YEARS!!)
0 of 1 people
found this instruction helpful.
-
Tommy from Charleston, SC
- Really Easy
- Less than 15 mins
We have an older .......range that came with our house when we bought it in 2000...the stove works fine (for an electric stove!), but the drawer was always problematic. Sometimes it would sit straight in the appliance cabinet and sometimes it wouldn’t. Sometimes it would flop up and down, sometimes it worked and sometimes it didn’t!
... Read more />
We lived with it for TEN years...then a couple of weeks ago I needed a pizza pan. I opened the drawer and the darned thing wouldn’t go back into the stove properly. I played with it for awhile, trying to figure out why it didn’t work correctly! After some energetic observation (accompanied by some choice words about American engineering!) I realized the front drawer guide was broken off!! It was one of those “Aha!” moments!!
I retrieved the plastic piece and went to a local appliance store to get a replacement. They said they’d order one (for 8.95 and I pay shipping and handling!), and it would take 2 to 3 weeks to get it! I declined their offer. Surely, somwhere on the internet there was a supplier who had this part!!
I sat down with my MacBook Pro and looked up “range parts” and was immediately directed to partselect.com. I looked up the part (which was ONLY $3.38) and ordered two. I had the parts in my hand in four days, and even with shipping paid less than half what the other place wanted locally.
I pulled the drawer out, literally dropped in the new guide, and the drawer has worked flawlessly since!! We are forever grateful for PartSelect and will always keep their address on top of our web vendors list!!
Give them a chance...the least you could do is save some aggravation, and maybe a little bit of money, too!!
... Read more />
We lived with it for TEN years...then a couple of weeks ago I needed a pizza pan. I opened the drawer and the darned thing wouldn’t go back into the stove properly. I played with it for awhile, trying to figure out why it didn’t work correctly! After some energetic observation (accompanied by some choice words about American engineering!) I realized the front drawer guide was broken off!! It was one of those “Aha!” moments!!
I retrieved the plastic piece and went to a local appliance store to get a replacement. They said they’d order one (for 8.95 and I pay shipping and handling!), and it would take 2 to 3 weeks to get it! I declined their offer. Surely, somwhere on the internet there was a supplier who had this part!!
I sat down with my MacBook Pro and looked up “range parts” and was immediately directed to partselect.com. I looked up the part (which was ONLY $3.38) and ordered two. I had the parts in my hand in four days, and even with shipping paid less than half what the other place wanted locally.
I pulled the drawer out, literally dropped in the new guide, and the drawer has worked flawlessly since!! We are forever grateful for PartSelect and will always keep their address on top of our web vendors list!!
Give them a chance...the least you could do is save some aggravation, and maybe a little bit of money, too!!
Read less
Was this helpful?
Thank you for voting!
Drawer was hard to close
0 of 1 people
found this instruction helpful.
-
Catherine from Washington, GA
- Really Easy
- Less than 15 mins
I am a 74 year old single woman. I removed the drawer and replaced the guide which has been missing for some time. Wish I had none about your company a long time ago.
Thank you
Thank you
Was this helpful?
Thank you for voting!
broken drawer glide
0 of 1 people
found this instruction helpful.
-
David from Lynbrook, NY
- Really Easy
- Less than 15 mins
piece of cake. snapped right in.
Was this helpful?
Thank you for voting!
Broken drawer glide
0 of 1 people
found this instruction helpful.
-
Jeffrey from West Kingston, RI
- Really Easy
- Less than 15 mins
First i removed the drawer. Then i removed the broken drawer glide and replaced it with the new one. Then i put the drawer back! The parts were a perfect match...
Was this helpful?
Thank you for voting!
Broken drawer glide
0 of 1 people
found this instruction helpful.
-
Myles from Twin Falls, ID
- Really Easy
- Less than 15 mins
-
Screw drivers
I used a screw driver to pop the broken glide out and then snapped in the new one. The repair took all of about 30 seconds. It probably would have taken even less time if the former owner had not epoxied the broken piece in place.
Was this helpful?
Thank you for voting!
I accidently threw away the drawer glide, when it fell off one day b/c I didn't know what it was. Later on when I started pulling out the bottom stove drawer, I discovered that it wasn't gliding properly....duh...
0 of 1 people
found this instruction helpful.
-
Reginal from Tampa, FL
- Really Easy
- Less than 15 mins
I just placed the new glider in place and put the drawer back on its hinges and it was good to go... my wife was extremely happy
Was this helpful?
Thank you for voting!