480447F Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
It burned out
1 person
found this instruction helpful.
-
Lorene from Lewiston, ID
- Easy
- 15 - 30 mins
-
Socket set
The new part was shipped and recieved very fast.
I removed the old one and installed the new one going by how I took the old one out. It was simple to do even for a 75 year old lady.. Thanks.
I removed the old one and installed the new one going by how I took the old one out. It was simple to do even for a 75 year old lady.. Thanks.
Was this helpful?
Thank you for voting!
Replace the bake element
1 person
found this instruction helpful.
-
Michael from Fort Worth, TX
- Easy
- 15 - 30 mins
-
Screw drivers
Had to remove the old element and had problems with the element shorted on the quick disconnect. After having my son unplug the appliance and cutting the quick connect off. My son then installed a new quick disconnect and the bake element.
Was this helpful?
Thank you for voting!
Heat element burned out.
1 person
found this instruction helpful.
-
Laura from Hurricane, UT
- A Bit Difficult
- 15 - 30 mins
-
Socket set
The problem I ran into Was; Having the right socket size for doing the project. After taking care of that problem it was fairly easily to disconnect the element and reconnect the new one. It's pretty self explanitory.
Was this helpful?
Thank you for voting!
Didn't Bake
1 person
found this instruction helpful.
-
Dale from Athens, TX
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Took it off, ordered a new part and put it back on.
Ordered on Monday and got the part on Tuesday.
Ordered on Monday and got the part on Tuesday.
Was this helpful?
Thank you for voting!
Banking Element needed replacement
1 person
found this instruction helpful.
-
Mitchell from Sebring, FL
- Really Easy
- 15 - 30 mins
-
Wrench set
For an electrical appliance, it doesn't get easier then this, this was real easy.
I removed both baking racks, unscrewed two screws holding the old element in place, pulled out element about 1 1/2 inches, removed the wires off of each end of the element, then replaced with new element in reverse order. That was it. Had time to ... Read more play 18 holes of Golf!
I removed both baking racks, unscrewed two screws holding the old element in place, pulled out element about 1 1/2 inches, removed the wires off of each end of the element, then replaced with new element in reverse order. That was it. Had time to ... Read more play 18 holes of Golf!
Read less
Was this helpful?
Thank you for voting!
Broiler element burned out
2 of 4 people
found this instruction helpful.
-
Dominick from Greensburg, PA
- Really Easy
- 30 - 60 mins
-
Socket set
I removed the four screws holding the element in place and pulled the element out and disconnected the two wire. Installation was pretty much the reverse of the removal except, when I went to put the two screws holding the element to the top of the oven I discovered the holes were rusted out. I looked for inserts to put in the holes bu
... Read more
t every time I tried different inserts the holes got bigger. I finally realized the oven is just sheet metal so I moved the bracket about an inch drilled new holes and used self-tapping screws.
Read less
Was this helpful?
Thank you for voting!
Oven element broke in three!
1 person
found this instruction helpful.
-
Keri from Raleigh, NC
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
First I gave my roommate (an engineer) a screwdriver to remove the two screws that held the element in place. Then before I could hit the switch for the circuit breaker, he nearly fried himself by trying to take out the element! He gave up helping me after that.
Then I turned off the circuit, pulled the oven out and unplugged i ... Read more t, removed the racks from the oven, removed the two screws that hold in the element, and lifted up each side of the element and pulled each piece out. Unfortunately, they were a little stuck in back.
So I pulled out the oven, unscrewed the 6 or 8 screws that held up the back panel, and pulled the back panel off. I disconnected the two wires clipped to the element and pulled the old element out by lifting up and pulling them out. I then put in the new bake element, clipped the wires back on, put the oven's back panel on and screwed it in place, and then screwed the bake element back in with those two screws. Easy - a
Then I turned off the circuit, pulled the oven out and unplugged i ... Read more t, removed the racks from the oven, removed the two screws that hold in the element, and lifted up each side of the element and pulled each piece out. Unfortunately, they were a little stuck in back.
So I pulled out the oven, unscrewed the 6 or 8 screws that held up the back panel, and pulled the back panel off. I disconnected the two wires clipped to the element and pulled the old element out by lifting up and pulling them out. I then put in the new bake element, clipped the wires back on, put the oven's back panel on and screwed it in place, and then screwed the bake element back in with those two screws. Easy - a
Read less
Was this helpful?
Thank you for voting!
Stove Element Stopped Working
1 person
found this instruction helpful.
-
Daniel from CASTALIA, OH
- Very Easy
- Less than 15 mins
-
Nutdriver
Unpluged Oven, Removed 2 screws, unpluged Element, Plugged in new element. Replaced 2 screws, plugged oven in. Done 15 minutes.
Was this helpful?
Thank you for voting!
Bake element broken
1 person
found this instruction helpful.
-
Susan from GERMANTOWN, NY
- Very Easy
- Less than 15 mins
-
Nutdriver
Removed old element with a nut driver, 2 screws. Disconnected electric wires on element, being careful not to let the wires slip into the back of the oven. Connected the wires on new element, lined up holes with holes on oven and screwed in 2 screws with nut driver. Done!!
Was this helpful?
Thank you for voting!
Bottom heating element burned out.
1 person
found this instruction helpful.
-
Mary from BAINBRIDGE, GA
- Really Easy
- Less than 15 mins
Unscrewed 2 screws, pulled the wires out and unplugged the old element, plugged the new one in, screwed 2 screws back in, so easy anyone can do this, it's nice to have a second person holding a flashlight but couldn't be any easier.
Was this helpful?
Thank you for voting!
Bake Element replaced
1 person
found this instruction helpful.
-
Roxanne from CANTON, OH
- Really Easy
- Less than 15 mins
-
Nutdriver
Watch the easy install video a couple of times and easy as a piece of cake!
Was this helpful?
Thank you for voting!
Left an appliance on surface element and melted paint onto the element
1 person
found this instruction helpful.
-
Kenneth from LANOKA HARBOR, NJ
- Very Easy
- Less than 15 mins
Plug the new element into the space on stove
Was this helpful?
Thank you for voting!
Oven element broke
1 person
found this instruction helpful.
-
DAVID from PEACHTREE CTY, GA
- Very Easy
- Less than 15 mins
-
Socket set
Since I had the element out I cleaned the stove. That took me 2.5 hours. Used cold spray and let sit for two hours and wipe out clean took about 30 minutes. Now for the element itself it took me about five minutes to put the new one in. Oven looks and works like new. Just google your repair needed and watch the video. Easy Peasy. L
... Read more
ast time I had it done by an electoral repair person for the tune of about $100.00. This time I bought the part and did it my self. Cost less than $25.00 including tax and shipping. No brainer.
Read less
Was this helpful?
Thank you for voting!
needed new drip bowls and 2 new elements
1 person
found this instruction helpful.
-
kathy from DAVIS, CA
- Very Easy
- Less than 15 mins
pulled them out and replaced them
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner would cutoff intermittently
1 person
found this instruction helpful.
-
Joseph from FREDERICKSBRG, VA
- Very Easy
- Less than 15 mins
Pulled out old burner/inserted new
Was this helpful?
Thank you for voting!