4645 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
end cap broke
3 of 4 people
found this instruction helpful.
-
GEORGE from WEST LIBERTY, OH
- Really Easy
- Less than 15 mins
slid one end cap into slot and pulled into place. Put other end cap into cross bar and put other end of cross bar on to other end cap proceeded to put other end cap in to other slot in door and pulled into place. Job complete Job took less than three minutes.
Was this helpful?
Thank you for voting!
The end cap of the bottom shelf of my freezer was broken
1 person
found this instruction helpful.
-
Kathleen from SELDEN, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Finally after a few years of putting the shelf back on and balancing food on it I looked up the part.
The clips came in a few days.
I used a screwdriver to pop off the old piece. I lined up the clip and pushed it in.!
I am sooo glad I purchased this.
The clips came in a few days.
I used a screwdriver to pop off the old piece. I lined up the clip and pushed it in.!
I am sooo glad I purchased this.
Was this helpful?
Thank you for voting!
No instructions included
1 person
found this instruction helpful.
-
Beverly from Provo, UT
- Easy
- Less than 15 mins
Visual assessment and put in by hand.
Was this helpful?
Thank you for voting!
broken pieces
2 of 5 people
found this instruction helpful.
-
D from Fairport, NY
- Really Easy
- Less than 15 mins
replaced them
Was this helpful?
Thank you for voting!
broken shelf end
0 of 1 people
found this instruction helpful.
-
Roger from Enfield, NH
- Really Easy
- Less than 15 mins
snapped in the new shelf end and we were back in business. Thanks for the great & fast service RJL
Was this helpful?
Thank you for voting!
Broken door shelf end brackets
0 of 3 people
found this instruction helpful.
-
RUDOLPH from PRINCETON, TX
- Really Easy
- Less than 15 mins
Push-in replacement - easy. I must note that I received my order within two days - remarkable service from Part Select!
Was this helpful?
Thank you for voting!
Broken door end cap.
0 of 5 people
found this instruction helpful.
-
Duane from Merrill, MI
- Really Easy
- Less than 15 mins
I was so supprised that Part slect was around and had the part . You can count on me to tell others about your wonderful service . I will see to it that I use your service when somthing else goes wrong with any of my appliences
Thanks again !
Thanks again !
Was this helpful?
Thank you for voting!
door shelf useless
0 of 9 people
found this instruction helpful.
-
Joel from Spring Green, WI
- Easy
- Less than 15 mins
Decide how to snap end cap into door.
Put one end on door.
Fasten bar, then with other end cap
in the bar, snap it into the door.
Put one end on door.
Fasten bar, then with other end cap
in the bar, snap it into the door.
Was this helpful?
Thank you for voting!
The tabs on the shelf end broke off.
-
Edwin from Littleton, CO
- Easy
- Less than 15 mins
Removed the broken shelf ends and installed the new ones. Then installed the assembly on the freezer door. Trick was to put the long end of the tab in first followed by the short end. The up end was reversed on the opposite shelf end.
Was this helpful?
Thank you for voting!
Broken shelf end cap
-
Donn from Saint PAUL, MN
- Really Easy
- Less than 15 mins
Truly a 10-second fix.
Was this helpful?
Thank you for voting!